How do I open my NAT type on BT Smart Hub?

How do I open my NAT type on BT Smart Hub?

Open up the smart hub interface. 192.168. 1.254, click on advanced settings then firewall. Scroll down to DMZ turn that on….Did you mean:

1. BT Community.
2. Archive.
3. Archive Staging.
4. NAT Type whitelisting.

How do I change settings on BT Smart Hub 2?

Click Save

1. Open a new web browser on a device connected to your Hub and type 192.168.1.254 in the address bar. This will open the Hub manager.
2. Click Smart Setup.
3. Enter the admin password.
4. Click the “On/off” button to turn Smart Setup on or off.
5. Remember once you make any changes you’ll need to save them.

How do I enable UPnP on my BT Smart Hub 2?

Go to advanced settings >Firewall > UPnP. Make sure both “UPnP” and “Extended UPnP Security” are set to yes and click apply. Go to advanced settings > Firewall > DMZ. Make sure “DMZ Enable” is set to no and click apply.

How do I access BT Smart Hub 2 settings?

How to open the Hub Manager

1. Open a new web browser.
2. Type 192.168.1.254 into the address bar.
3. This will open the Hub Manager.
4. If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.

How do I change the NAT type on my BT mini hub?

1. Open a new web browser on a device connected to the BT Mini Hub and type minihub.home in the address bar.
2. Enter the Admin password.
3. Click Set-up.
4. Click Wireless set-up.
5. To change your wireless network name overtype the existing network name and password.
6. Remember: once you make any changes, you’ll need to save them.

What frequency is BT Hub 2?

2.4Ghz
BT Smart Hub 2 users are complaining of connection issues between their wifi-enabled devices. The telecom giant’s router operates using two different wireless frequencies: 2.4Ghz and 5Ghz.

Does BT Smart Hub 2 have UPnP?

Re: Port Forwarding and UPnP BT Smart Hub 2 UPnP is effectively automatic port forwarding and is best disabled if you manually set up a port forwarding rule to avoid any clashes. Make sure you save the rule after creating.

How do I access my BT mini hub settings?

To change the settings on the BT Mini Hub you need to use the Mini Hub Manager.

1. Open a new web browser on a device connected to your BT Mini Hub and type minihub.home in the address bar. This will open the Mini Hub Manager.
2. Enter the Admin password.
3. You can then access and make changes to your settings.

How do I reset my BT 4G mini hub?

Hold the power button down for ten seconds and it will reboot. Having problems with your Mini Hub? Just reset your Mini Hub and you’ll be back up and running in no time. Use a paperclip or blunt pin to gently press the reset button.

How do I open a port on my BT Smart Hub 2 router?

To open a port in your BT Smart Hub 2 router, follow these important steps: Set up a static IP address on the device or computer you are forwarding these ports to. Log in to your BT Smart Hub 2 router. Navigate to the Port Forwarding section in your BT Smart Hub 2 router.

Can you use NAT type 2 on PS4?

Nat type 2 on ps4 (and ps3) is open. It is the optimal setting for anyone using a router. Type 1 is only possible if you connect your ps4 directly to a modem which isn’t practical as no other devices in your house would be then able to connect to the internet.

Where do I find port forwarding on my BT router?

Click on the Advanced Settings button at the bottom right of the screen. Find the Firewall button at the middle of the screen and click on it. You are now on the Port Forwarding page. This is the port forwarding page from your BT router. To create an entry, click on the button called Create a new port forwarding rule.