How do I set up my juniper EX2200?

How do I set up my juniper EX2200?

To connect and configure the switch from the console by using the CLI:

1. Connect the console port to a laptop or PC by using the RJ-45 to DB-9 serial port adapter.
2. At the Junos OS shell prompt root%, type ezsetup .
3. (Optional) Enter the hostname.
4. Enter the root password you want to use for the device.

How do I reset my juniper EX2200 to factory settings?

6. RE: reset factory default EX2200

1. Start a root shell by logging in as root and then either omit the cli command or from operations mode, type start shell.
2. Change into the /config directory by cd /config.
3. Delete all files from there by rm *
4. Reboot your device.

How do you set up a Juniper switch?

To configure the switch:

1. Connect the console port to a laptop or PC using the RJ-45 to DB-9 serial port adapter.
2. At the prompt type ezsetup.
3. Enter the hostname.
4. Enter the root password.
5. Enter yes to enable services like telnet and SSH.
6. Next, select one of the switch management options:

How do I reset the root password on a juniper EX2200?

8. RE: Unable to reset password on EX2200

1. Obtain console access.
2. Power off the system and boot it up in single user mode.
3. Next, the system will run the normal bootup process.
4. The system will finish booting up and display the root>prompt.
5. Enter configuration mode and edit or delete the root authentication password.

Is there a packet tracer for Juniper?

If you’re strapped for cash or can’t find a suitable second-hand switch to practice on, the network simulator GNS3 allows easy emulation of Juniper routers inside a virtual environment. If you’re coming from a Cisco point of view, GNS3 is similar to Cisco’s Packet Tracer simulation tool.

How do I set my juniper switch to factory settings?

Reverting to the Default Factory Configuration by Using the Menu Button

1. Press the Menu button until you see MAINTENANCE MENU on the panel.
2. Press the Enter button.
3. Press Menu until you see FACTORY DEFAULT.
4. Press Enter. The display says RESTORE DEFAULT?
5. Press Enter.

How do you reset a Juniper switch?

To restart the switch from the front panel:

1. From the LCD front panel menu push the Menu button.
2. When the MAIN MENU (Maintenance menu) appears, press the Enter button.
3. Select the SYSTEM REBOOT option and press the Enter button.
4. To exit the menu without rebooting the switch, press the Menu button again.

What is the default password for Juniper switch?

Change or modify – The default password (abc123) is used during initial configuration, after installation.

How do I change my juniper root password?

Step-by-Step Procedure Type the set command for the plain-text password and press Enter. [edit] user@host# set system root-authentication plain-text-password New password: Type the new password next to the New password prompt and press Enter.

How do I access Juniper CLI?

To log in to a device and start the CLI:

1. Log in as root . The root login account has superuser privileges, with access to all commands and statements.
2. Start the CLI: root# cli root@> The > command prompt shows that you are in operational mode. Later, when you enter configuration mode, the prompt will change to #.