What are PG thread sizes?

What are PG thread sizes?

Thread dimensions for Pg threads (according to EN 40430)

Thread Ø d1 Ø d2
Pg 9 13.86 mm 15.20 mm
Pg 11 17.26 mm 18.60 mm
Pg 13.5 19.06 mm 20.40 mm
Pg16 21.16 mm 22.50 mm

What size is PG 16?

Pg Thread DIN 40430 Steel Conduit Thread

For cable diameter mm Thread Size Major Diameter mm
Pg 16 22.5 14.0
Pg 16 22.5 14.0
Pg 21 28.3 18.0
Pg 21 28.3 18.0

What is a PG connector?

PG is a thread type, like NPT or Metric, with specific dimensions. It is shorthand for Stahlpanzergewinde: literally “Steel tank thread”. More often it is called by the shorter name Panzergewindeor (hence the PG) — or for us Southerners: conduit threading.

What is pg9?

Provides Strain Relief. Threads: M15 x 1.5mm. Waterproof Rating: IP67. Cable Range: 4-8mm.

What is the difference between PG thread and metric thread?

The PG stands for Panzer-Gewinde . This is a German type thread. The Main difference on this vs NPT and Metric is that the depth of the thread is smaller but has a larger flank angle, which makes it have a wider pitch along with a straight thread. These will have a 1/16 taper to the threads.

What angle are metric threads?

60°
ISO metric threads consist of a symmetric V-shaped thread. In the plane of the thread axis, the flanks of the V have an angle of 60° to each other.

What Rated PG-13?

The M category was eventually changed to PG (parental guidance suggested), the R age limit was raised to 17 and on July 1, 1984, the PG-13 category was added to indicate film content with a “higher level of intensity.” According to the MPAA, the content of a PG-13 film “may be inappropriate for a children under 13 …

What PG13 5?

Model: PG13. 5 cable glands. Material: High quality nylon PA66 plastic. Cable range: 6 – 12mm/0.23 – 0.47 inches. Thread O.D.: 20.4mm/0.81 inches.

What is a TE160?

TE160 This document prohibits the driving of an overweight vehicle on the road. TE160dh This document prohibits the driving of an overweight vehicle on the road due to drivers hours (dh) offences, such as insufficient breaks or daily rest.

Can Dvsa pull you over?

As a commercial driver, you might be asked to stop by the police or a Driver and Vehicle Standards Agency ( DVSA ) officer. They can stop vans, lorries, buses and coaches. The police and DVSA have the power to carry out spot checks on your vehicle and issue prohibitions if necessary.

What is M20 gland?

M20 Waterproof Cable Gland M20x1. 5 cable gland means the metric type thread with the dimension of the hole size is 20mm, which is around 0.787 inches size, it is designed in IP68 waterproof protection degree to ensure the cable pass-through without exposing the equipment to any damaging stuffs.

How many sizes of PG thread are there?

For replacement PG-items may still be used. The ten sizes PG 7 / 9 / 11 / 13,5 / 16 / 21 / 29 / 36 / 42 and PG 48 were replaced by eight new metric sizes, i.e. M 12 / 16 / 20 / 25 / 32 / 40 / 50 and M 63. No direct conversion is possible! By this new standard a suitable solution was not achieved.

What’s the flank angle on a PG thread?

Pg Thread DIN 40430 Steel Conduit Thread. The flank angle is 80°. On 31.12.1999 the safety standard VDE 0619 which included the standards DIN 46319 for metric sizes and DIN 46320 for PG-sizes were withdrawn. On 01.01.2000 the new standard DIN EN 50262 came into force.

Is the PG thread being phased out in Europe?

Pg thread usage is trying to be phased out in continental Europe. A new metric thread standard (EN 50262) will be phased in as mandatory beginning on March 1, 2001 replacing the Pg thread. There was a different standard for electrical conduit threads based on the 55° Whitworth thread form. That standard has been made obsolete.

When did the PG standard change to m?

In the transitional period – until 01.03.2001 – the PG-standard could still be used. For replacement PG-items may still be used. The ten sizes PG 7 / 9 / 11 / 13,5 / 16 / 21 / 29 / 36 / 42 and PG 48 were replaced by eight new metric sizes, i.e. M 12 / 16 / 20 / 25 / 32 / 40 / 50 and M 63.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top