What is the IP address of my Linksys router?

The default IP address of a Linksys router is “192.168. 1.1”.

How do I access my Linksys WRT54G router?

Open a web browser and enter http://192.168.1.1/ as the URL, and admin as the password. Change the default router password from admin to something more secure. Be sure to take note of the password.

How do I factory reset my WRT54GS?

3. How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release. Alternatively, use the web-based setup page, go to Administration tab > Factory Defaults sub-tab and click the Restore Factory Defaults button.

How do I find the IP address of my Linksys access point?

Note the IP address of the “Default Gateway” entry listed on the sixth line below the “Ethernet adapter” header in the command line output. The “Default Gateway” IP address is the IP address of the Linksys access point.

How do I reset my Linksys router IP address?

Locate the Reset button and, using a pen or a paper clip, press and hold the Reset button for 10 seconds. QUICK TIP: For router models such as the Linksys Wireless-B and Wireless-G routers, press and hold the Reset button for 30 seconds. QUICK TIP: Observe the Power light of the router while pressing the button.

What is the default IP of a Linksys WRT54G?

192.168.1.1
What default IP Address, username and password are used to log in to the router’s web-based setup page? The default IP Address is 192.168. 1.1. On the log in window, leave the username blank and the password is “admin”.

How do I Reset my Linksys E2500?

There are two (2) ways in resetting the Linksys E2500 to factory defaults:

Press and hold the Reset button at the bottom of your router for 10 seconds then release.
Log in to the router’s web-based setup page then go to Administration > Factory Defaults > Restore Factory Defaults.

How do I setup my Linksys wrt54gs router?

How to Set Up a Linksys WRT54G Wireless G Router

Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
Step 2: Connect Your Computers.
Step 3: Connect the Power.
Step 1: Log In.
Step 2: Open Wireless Settings.
Step 3: Name the Network.
Step 4: Set Up Security.

How do I find the IP of my old router?

How to find the IP address of your router using Windows

Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
In the Command Prompt window, type “IPCONFIG” and press Enter.
Find the “Default Gateway” section. The number listed here is your router’s IP address.

How do I hard reset my Linksys router?

1 Factory Reset

Ensure the router is ON.
Using a paper clip, push and hold the Reset button.
Hold the reset switch for 10-15 seconds.
Disconnect and reconnect the router’s power adapter.
Once it fully reboots, you can use the default username and password to connect the device.

What’s the default IP address for the Linksys WRT54GS?

The default IP address of your device is 192.168.1.1 . To log in, enter “admin” on the password field and leave the username blank. 3. How can I reset the WRT54GS to factory defaults?

How can I reset the WRT54GS to factory defaults?

How to reset the settings on a Linksys router?

To reset your router, use the following steps: 1 Press the reset button for 30 seconds. 2 The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted. 3 Open up your Web browser and enter “192.168.1.1” in the address bar. 4 For the login, leave a blank ID and enter “admin” as the password.

What’s the IP address of my Linksys router?

Open your Web browser and enter the IP address of your router. By default, the address is “192.168.1.1”. Enter your user ID And password when prompted. Hopefully this has been changed, but if it hasn’t, the default is no ID and “admin” as the password. At the top of the Web page, click “Administration” and then “Factory Defaults”.