How do you add oil to a Torin jack?

How do you add oil to a Torin jack?

Add oil by inserting a small funnel into the oil filler hole, then slowly add a small quantity of jack oil. Remove the funnel. Wait 30 seconds for the oil to dissipate, then check the level with the flashlight method again.

How do you release a jack without a pole?

Jack stands under both sides of the axle and then find a ratchet and socket that will grab the release shaft, which I’m assuming is square. Release the jack really slowly and get your hand off the ratchet. You should be able to pull the jack out and start over.

How does a Torin Jack work at home?

Essentially, the jack is actuated, applying pressure to the hydraulic fluid, which in turn raises a steel piston within a sealed cylinder. Unfortunately, Torin jacks are not easily serviced at home, requiring professional rebuilding if any problems are evident.

Is there a warranty on a Torin Jack?

Torin jacks are considered non-user serviceable, and attempting to repair one that is under warranty could void your Torin warranty. Torin jacks have far more moving parts within the jack cylinder than you might suspect.

How can I tell if my Torin hydraulic jack is leaking?

Unfortunately, Torin jacks are not easily serviced at home, requiring professional rebuilding if any problems are evident. Inspect the Torin hydraulic jack carefully to determine if you can see any places where hydraulic fluid may be leaking from the hydraulic cylinder. These will appear as dark brown spots on the exterior of the cylinder.

What to know before using hydraulic trolley jack?

• Keep all decals on the unit clean and visible. • Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn, or missing parts. • Do not use the jack unless it is properly lubricated. • Using a jack that is not in good clean working condition or properly lubricated may cause serious injury.