Is vivotek any good?

Is vivotek any good?

The camera delivers impressive image quality, due to its high-quality optics and image sensor. The picture is sharp and well-saturated, with good dynamic range. In low light, the image becomes rather noisy, so adequate lighting should be used in order to avoid this.

Where are Vivotek cameras made?

Taiwan
VIVOTEK INC., established in 2000, Taiwan, has quickly taken its place as a leading manufacturer in IP surveillance industry.

What is a vivotek device?

Smart Management Tool. Device Center is an all-in-one management tool that facilitates the configuration of multiple counting cameras across different sites. It is especially valuable for projects involving multiple counting cameras with the same settings and for counting result analysis.

Is vivotek a Chinese company?

VIVOTEK INC., established in Taiwan in 2000, has quickly grown into a prestigious leading manufacturer in the network video surveillance industry. In 2006, VIVOTEK (TAIEX: 3454) was listed on the Taiwan Stock Exchange. VIVOTEK has more than 120 authorized distributors in more than 70 countries. …

Are Vivotek cameras Onvif?

The current firmware of Vivotek cameras does not support dedicated ONVIF user rights. The IT manager must ensure the appropriate security measures for unauthorized access to these cameras in the network to compensate for this limitation of Vivotek.

Is Vivotek a Chinese company?

Are Vivotek camera ONVIF?

How do I make my Vivotek camera default?

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and green simultaneously. Note that all settings will be restored to factory default.

How do I access Vivotek NVR?

To establish a connection with VIVOTEK’s embedded Linux-based NVR, you need to enable the connection on a web console via Network > Service. Select the “Allow CMS and iViewer connection” checkbox, and enter the same password as that you use for login to an NVR console.