How do you turn on the rats nest in Altium?

How do you turn on the rats nest in Altium?

You can turn on/off individual connection lines from the PCB panel: Select Nets view from the drop-down, then select . In the Nets section, double-click on a net to open the Edit Net dialog where you can verify the status of the “Hide Connections” checkbox.

How do I show nets in Altium?

Position the cursor over the net (or a pad connected to the net) you wish to show and click, or press Enter. All connection lines for the chosen net will be shown.

How do you hide in nets Altium?

Right click on a net, and choose Net Actions >> Hide Nets.

Where are unrouted nets in Altium?

There are various ways to detect unrouted nets:

1. Use Tools ► Design Rule Check to select the “Rules To Check” tab in the left pane, then check the box in the “Batch” column for the “Un-Routed Net” row near the bottom.
2. Reports ► Board Information check box for Routing Information ► Report button.

How do I create a netlist in Altium design?

Generating Netlist Output directly from the Project Netlist Output can also be generated directly from your project. To generate a Netlist for the Project, navigate to Design » Netlist for Project.

How do you use the harness in Altium?

After placement, the Signal Harness dialog can be accessed by:

1. Double-clicking on the placed signal harness object.
2. Placing the cursor over the signal harness object, right-click, then choose Properties from the context menu.

How do I change the Net color in Altium?

To change the color of one or multiple nets, select the required nets in the panel, then right-click on a selected net and choose the Change Net Color command, as shown below, or. For an individual net, double-click the net name in the PCB panel to open the Edit Net dialog, where you can edit the connection line color.

How do you pour a polygon in Altium?

Polygon Pour Cutout

1. Click Place » Polygon Pour Cutout.
2. The cursor will change to a crosshair, starting inside the boundary of the polygon.
3. Move the cursor across the polygon.
4. Continue to click and move the mouse to define the cutout outline.
5. Right-click to exit polygon cutout placement mode.

What is net tie in PCB?

The Net Tie is a component type which allows for shorting together various nets in a design. Specifying the componet Type as Net Tie allows placing copper features between PCB footprint pads in order to facilitate connecting (shorting) various nets together at very specific locations on the PCB.

How do you delete all traces in Altium?

To delete a group of tracks, select the segments of all the tracks you want to delete using right-to-left selection. Then press the Tab key to select them. Press the Delete key to remove all selected tracks.

What is silk to solder mask clearance?

Summary. This rule checks the clearance between any silkscreen primitive and any solder mask primitive, or exposed copper-layer primitive (exposed through openings in the solder mask). The check ensures that the distance is equal to, or greater than, the value specified in the constraint.

How to show connection lines in rats nest?

Connection lines, or Rats Nest (ratsnest), display is controlled in more than a few ways: The connection choices can be used to show and hide all connections, specific nets, and nets associated with a particular component. Here’s more information: Select Nets view from the drop-down, then select .

How to hide all airwires at once in Altium?

This will hide all airwires at once. In Altium Designer 16.x, while viewing the PCB go to View > Connections > Hide All. This will hide all of the ratnest nets. If you select a component that one component’s nets will be shown as a convenience, but other than that I think this solves your problem.

How to hide all nets in Altium Designer 16.x?

In Altium Designer 16.x, while viewing the PCB go to View > Connections > Hide All. This will hide all of the ratnest nets. If you select a component that one component’s nets will be shown as a convenience, but other than that I think this solves your problem. I find it useful to enable this option during initial placement of a crowded design.

What happens when you delete a track segment in Altium?

If you delete a track segment, the software detects the break and immediately adds a connection line to restore the net connectivity. When a net is analyzed and a connection line added, the software automatically adds it based on the topology of the net. By default, all nets have their topology set to Shortest.