How do you program a key for a 2003 Pontiac?

How do you program a key for a 2003 Pontiac?

Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, press and hold the lock button by itself. Within 10 seconds, the door locks should lock and then unlock once indicating successful programming.

How do you program a 2002 Pontiac Bonneville key fob?

Insert your jumper wire into the top right slot and the bottom left slot. This jumps the pins and activates the programming mode. You’ll hear the door locks cycle. Push the “Lock” or “Unlock” button three times on the remote you wish to program rapidly.

Does a 2000 Bonneville have a chip key?

One Transponder chip key for 2000 Pontiac Bonneville – brand new, aftermarket (NO GM logo). This key must be professionally cut when received by a local automotive locksmith (click here for Locksmith Search ) or hardware store.

How do you program a key fob for a 2003 Pontiac Grand Am?

Put your key into the ignition, and turn to “ACC.” Turn the key on and off within a second. Open and close the driver’s door and listen for the chime that indicates you are in programming mode. Press and hold the LOCK and UNLOCK buttons for 14 seconds, listening for the chime. Wait 14 seconds for the second chime.

How do you program a Pontiac key?

How to Program a Pontiac Ignition Key

1. Enter your car and insert your key into the ignition.
2. Cycle the key in the ignition to the “On” position and leave it in that position for 10 minutes and 30 seconds.
3. Cycle the key back “Off” within 45 seconds.

Does a 2003 Pontiac Grand Am have a chip in the key?

Step by Step How to Programming Instructions: This vehicle is NOT equipped with a chip key transponder system so no programming is required for ignition key. …

How do you program a key fob?

BLOG

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

How do you program a key fob for a 2001 Pontiac Grand Prix?

2001 Pontiac Grand Prix Key Fob Remote Programming Instructions

1. Remove the key from the ignition.
2. Close all doors.
3. Remove the “MALL PGM” fuse from the fuse panel.
4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door.

Does a 2005 Pontiac Bonneville have a chip in the key?

Pontiac Bonneville was introduced in 1958. This model has four types of keys. Transponder chip key: 2000 to 2005. Non-transponder keys: 1970 to 1999.

How can I get vats without a key?

How to find vats resistance without key?

1. Use a multimeter to measure the Ohms value of the thin strip of metal on the plastic oval on the keyblade of your key.
2. Choose the Resistor that most closely matches the Kilo-Ohms value of your key’s chip.

What is Mall PGM fuse?

The MALL PGM fuse, when removed, will put the MALL (aka, the Body Control Module) into programming mode. This is used for programming keyless entry fobs.