How do you use oxine sanitizer?

How do you use oxine sanitizer?

Proper Use of Oxine Fill sprayer with Oxine® AH, add 2.0 ounce of citric acid (1 tablespoon) per 16 fluid ounces of Oxine® AH, and allow to set for five minutes. A yellow color should develop as an indicator that the product is being activated for use.

How do you give chickens oxine?

The standard treatment is to dilute 6.5 ounces of Oxine in 1 gallon of water. (This provides 1000 ppm of active disinfectant.) Apply using fogging or nebulizing equipment every other day for a week – OR – up to 3 times per day for very severe cases.

What does oxine kill?

Oxine Animal Health (AH) has been tested and proven effective against a variety of bacteria, fungi and viruses, including E. coli, Salmonella, Staphylococcus, Parvovirus and more. Utilizes chlorine dioxide chemistry to eliminate odors and kill the bacteria that causes them.

What is oxine sanitizer?

OXINE is a highly refined blend of oxychloro species containing purified sodium chlorite. When activated, chlorine dioxide is produced, greatly enhancing Oxine’s antimicrobial activity, making it an excellent sanitizer.

How safe is oxine?

Oxine® is toxic to fish and aquatic organisms. Do not discharge effluent containing this product into lakes, rivers or streams. Do not discharge effluent containing this product to sewer systems without first notifying the sewage treatment plant. Oxine® does not bio-accumulate and is biodegradable.

Is oxine safe for chickens?

Some bird owners report Oxine AH has reduced incidences of some hard-to-treat respiratory illnesses in their birds. Oxine kills many types of fungi, as well as Avian Influenza A virus, Newcastle Disease virus, Staphylococcus, Streptococcus, Salmonella, E. Coli, Mycobacterium, and many other bacteria and viruses.

Is oxine a bleach?

Unlike bleach, chlorine dioxide does not create cancer-causing byproducts. Oxine is VERY SUPERIOR TO BLEACH for cleaning surfaces that have biofilm or are porous. With a bleach solution, bleach’s power can get used up on a porous surface area (such as wood) or where there is organic matter.

How do you sanitize ductwork?

How to Sanitize Ductwork Yourself

1. Protect Yourself. First, to avoid inhaling dust or debris put on a mask and safety goggles.
2. Clean With a Vacuum. To clean the ducts, vacuum all the dust, dirt, and other particles.
3. Close All Vents But One.
4. Run the Hose.
5. Clean Up.
6. Benefits of Residential Air Duct Sanitizing.

How do you access the evaporator coils in a sealed case?

To access the coils, remove the evaporator coil access panel. To remove the access panel, remove the metal tape that seals the panel. Next, remove the screws that secure the access panel of the evaporator coil to the air handler. You’ll notice that the evaporator coil is organized into a frame having two sides.

What is oxine made of?

OXINE is a highly refined blend of oxychloro species containing purified sodium chlorite. When activated, chlorine dioxide is produced, greatly enhancing Oxine’s antimicrobial activity. OXINE is a highly refined blend of oxychloro species containing purified sodium chlorite.

Is oxine safe for humans?

Important note: Some types of uses (such as directly soaking food or adding to drinking water) of activated Oxine should be limited to low concentrations, such as 5-15 ppm. Numerous scientific studies have demonstrated that even activated chlorine dioxide is safe to inhale when present in the air at very low levels.

How to apply oxine AD in a respirator?

OXINE-AD® should be applied by the applicator wearing a NIOSH-MSHA approved respirator with an Organic Vapor/Acid Gas Cartridge. Secure proper respiratory and eye wear protection prior to activation. 1. Pour 3.25 fl. oz. of OXINE® concentrate into a suitable mixing container. 2. Add 10 grams of OXINE® activator crystals to the OXINE® concentrate.

How long does it take to make oxine sanitizer?

Place 100ml of Oxine Concentrate and 10 grams of Activator into a container.Prepare in well-ventilated area. Colour changes from clear to yellow.Allow 5 minutes for crystals to be dissolved. After 5 minutes, dilute with clean water to four (4) litres.

How big of an area can you sanitize with oxine?

Proven against blood borne pathogens such as MRSA, Acid VER, HIV, HEP-C, Influenza-A Virus, Covid-19 and others. 1L of concentrated Oxine® able to produce up to 40L of active Oxine® solution. It will be able to sanitize up to 50,000 suqare feet of office space.

Why is oxine used as a disinfectant?

Oxine® is a US “EPA registered 9804-1” disinfection compound that is used to eliminate bacteria pathogens fungi viruses (including COVID-19) and prevent the spread of communicable infections.