Why is my Fellowes shredder not working?
Pull the paper out manually if the switch-toggling fails to clear the jam. Oil the shredder if jams repeat. Move the power switch to the Auto position or the Forward position for five seconds if the shredder will only function in reverse. The shredder may be blocked and this will clear any blockage.
What causes a paper shredder to stop working?
The main paper shredder jam causes tend to be: Putting in too many sheets of paper. Shredding the wrong materials. Not oiling (lubricating) your shredder.
Are shredder Lubricant Sheets necessary?
Yes, every shredder needs lubrication to keep it run smoothly. Regularly oiling your shredder with an official shredder lubricant will improve the lifespan and your shredder’s performance. A lubricant sheet is a pre-oiled sheet you can shred with your shredder.
Is there a reset button on a Fellowes shredder?
b) The shredder may need to be reset. Switch it to the reverse (R) position for 2 seconds and then back to auto (I). This should reset it and it will operate again.
How do you reset a Fellowes paper shredder?
Can I use wd40 to lubricate my paper shredder?
The answer is no. This product is not designed to lubricate a shredder head properly. Like other oils, such as vegetable or canola, WD-40 would cause the paper to stick together, inevitably gumming up and jamming the machine.
Can you use 3in1 oil for shredder?
The mechanism is so simple virtually any oil (I wouldn’t use car oil) will work just fine. Dry oil, vegetable oil, shredder oil, 3-in-1, etc. If you use vegetable oil don’t pour straight from the bottle as you will pour too much. Run the shredder on reverse for 30 seconds or so with no paper.
How often should I oil my paper shredder?
You should oil cross-cut shredders each time you empty the waste basket or at least twice a month. Micro-cut shredders should be oiled more frequently, ideally, after every 15 minutes of use.
Can you use wd40 on shredders?
Where is the sensor on Fellowes paper shredder?
A majority of Fellowes shredders have 2 small electronic sensors in the throat of the paper entry slot.