Why does my Sony receiver says speaker off?

Why does my Sony receiver says speaker off?

Check that all connecting cables are inserted to their input/output jacks on the receiver, speakers and the devices. Check that the receiver and all devices are turned on. Check that MASTER VOLUME on the receiver is not set to [VOL MIN]. Press SPEAKERS on the receiver to select a setting other than [SPK OFF].

How do I turn on the speakers on my Sony receiver?

How to select the Speaker B option on my A/V receiver.

1. Make sure that speakers are properly hooked up to the Front B speaker port of the receiver.
2. Using the supplied remote, pull up the menu of the A/V receiver and select Speaker Settings.
3. Under Speaker Settings, select Speaker Pattern.

Why does my Sony surround sound keep shutting off?

Check if your model has the Auto Standby function. If Auto Standby is activated, the soundbar will turns itself off or enter standby mode automatically after aproximately 15 minutes to reduce power consumption of the device. Some models have the capability to turn off this function.

Why does my receiver shut off by itself?

If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (e.g., refrigerator, air conditioner, heater, or vacuum), the receiver may shut itself off when there is insufficient current.

How do I stop my speakers from turning off?

The power of the audio system or portable speakers turns off automatically after 15 minutes.

1. Tap the Music Center（SongPal） application icon on your mobile device.
2. Tap an audio device on the Speaker & Group screen.
3. Tap the Settings icon on the audio device screen.
4. Select Power Option.
5. Uncheck Auto Standby.

Why is Centre speaker not working?

Check the volume level to verify the sound is set at an acceptable level. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check the speaker wires to make sure they are properly connected to the A/V receiver. Perform a test tone function to verify that the speakers are working correctly.

Why does my Surround Sound have no sound?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

How do I get my Sony home theater out of protected mode?

To isolate the problem, do the following: Turn off the home audio device, and remove all speaker wires from the back. Then turn the device back on and check if the issue is resolved. If it is still having the same issue, turn off the device again leave it off for at least 30 minutes before turning it on again.

Why is my Sony receiver in protect mode?

If you’re wondering why “my Sony receiver is flashing protect,” it’s likely related to a short circuit or a power surge. Once the protect mode is activated, the speakers will not function until the threat is removed. The best first course of action is to simply turn everything off and wait while the system cools down.

Why does my speaker keep shutting off?

If your speaker keeps powering off, you may have a challenge trying to power it back on. Sometimes the battery or the circuit board of your speaker might be damaged. If the battery is damaged, the battery cannot hold charge long enough, and it keeps powering off.

Why does my surround sound keep shutting off?

In many cases, premature shutoff of your unit can be caused by a problem with the speaker wiring between the receiver and speakers. A single strand of wire in the wrong place (causing a short circuit condition) will cause the unit to shut off at anything but very low volume levels.