Where is the light in a Sub-Zero refrigerator?

Where is the light in a Sub-Zero refrigerator?

In all models except 501 and 601, the light switch is mounted to the top mainframe. In models 501 and 601, the switch is mounted to the bottom mainframe above the unit grille.

Why did my light go out in my Sub-Zero refrigerator?

For freezer sections, the light switch may be frozen. Defrost the unit if possible. See Manually Defrost a Sub-Zero for instructions. If lights still do not turn on, replace the light switch.

How do you turn off the light on a Sub-Zero refrigerator?

The lights will stay off for 45 minutes after the door is closed, and all evaporator fans will run with the door or drawer open. Close the door without opening it for 45 minutes, or bypass the 45 minute wait by powering the unit off either at the breaker or unplugging it and turning back on.

How do I change the bulb in my Sub Zero?

Pull the diffuser outward to remove it. Remove the old bulb at the top of the drawer compartment by twisting counterclockwise. Replace with a new 25-watt appliance bulb by twisting it clockwise to lock in place. Return the light diffuser to its place by pushing it down in its slots.

Can I use an appliance bulb in a lamp?

LED bulbs should never be used in an oven. If you really want to, you can use an appliance bulb in a standard lamp, but since they are more expensive and less eficient, there’s no benefit in doing so.

How do I reset my Sub-Zero refrigerator?

To reset a Sub-Zero product:

1. Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
2. Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.

What happens when fridge light goes out?

If your refrigerator light is not coming on, it may be that the bulb has reached the end of its lifespan and has burned out. Check the bulb to see if it has a dark area in the bulb or has a broken and loose filament. Unplug your refrigerator, change the bulb, and it’s likely that this will solve this problem.

How do I change the bulb in my Sub-Zero?

What happens if I use a 60w bulb in a 40w lamp?

Using a light bulb with too high of wattage can lead to overheating of the light bulb. This heat can melt the light socket as well as the insulation of the wires. Once that happens, you put yourself at risk of arc faults, and this is something that could even lead to property fires.