How do I clean my HP color laserjet cp2025 printer?

How do I clean my HP color laserjet cp2025 printer?

Clean the product

1. Open HP ToolboxFX. See Open HP ToolboxFX.
2. Click the Device Settings folder, and then click the Service page.
3. In the area for Cleaning Mode, click Start to begin the cleaning process. The product processes a single page, and then returns to the Ready state when the cleaning process is complete.

How do you reset a fuser kit?

Press the Home screen, scroll to and touch the ADMINISTRATION button.

1. Select the MANAGE SUPPLIES menu.
2. Select the RESET SUPPLIES submenu.
3. Select the option for NEW FUSER KIT.
4. When it says NEW FUSER KIT = NO / YES, select YES.
5. Press OK to save that selection.

How do you remove fuser from HP M477?

Use the power switch to turn the power on.

1. Step 1: Remove Tray 2.
2. Step 2: Open the front door and duplexer door.
3. Step 3: Remove the right cover (M452 models)
4. Step 4: Remove the right cover ( M377, M477 models)
5. Step 5: Remove the left cover (M452 models)
6. Step 6: Remove the left cover ( M377, M477 models)

How do you change a fuser kit?

Solution

1. Power off the printer.
2. Open the left side cover (also called door A).
3. Turn the two thumbscrews at each end of the fuser counter-clockwise.
4. Lift out each of the fuser hooks.
5. Using the fuser hooks, carefully pull the fuser unit out of the printer.
6. Remove the new fuser unit from the packaging.

What is fuser roller?

Fuser assembly consists of two pairs of rollers. The lower fuser roller, also known as the pressure roller, is a soft rubber roller. This way the printing paper is subjected to heat and pressure at the same time, which melts the toner and creates the desired printout. …

How do you clean a color laser printer?

What you will need to clean a laser printer:

1. Switch your printer off, unplug and allow to cool down.
2. Put on your latex gloves and dust mask.
3. Remove the imaging drum.
4. Remove the toner cartridge.
5. Speak to a qualified engineer to clean internal parts.
6. Clean surfaces with isopropyl alcohol wipes.
7. Reassemble parts.

What is an HP transfer kit?

What does a HP transfer belt do? The transfer kit is a printer part that has a black polymer belt which carries the CMYK color toner and transfers the particles from the cartridge uniformly onto the paper.

How do I change the imaging drum on HP Laserjet Pro MFP m176n?

Step 2: Replace the imaging drum

1. Lift the scanner assembly.
2. Open the toner cartridge access door.
3. Remove the dust cover.
4. Open the front cover.
5. Lift the two levers that hold the imaging drum.
6. To remove the old imaging drum, pull it out of its slot.
7. Unpack the new imaging drum.

What does the fuser do in a laser printer?

The fuser unit is a heated roller that melts the toner particles onto the page as it passes through. This seals the toner to the page so it’s no longer in powder form and makes sure that the toner doesn’t smudge of fall off the paper when it comes out of the printer.