What is a Jeep JK High steer kit?
The Jeep JK High Steer Kit. This kit brings your steering angles back into factory specs on 3.5”-5.5” lifted JK Wranglers. The axle mounted track bar bracket accepts and allows for adjustment with the OE track bar while also relocating the steering stabilizer above the drag link.
What does a high steer kit do?
AEV’s High Steer Kit provides significant improvements to steering precision and handling by correcting the roll center height of the front suspension.
What is a high steer Dana 60?
Dana 60 High Steer Arms are a great way to move your crossover steering up. Creating more ground clearance for when you’re out on the trail. Our Dana 60 High Steer Arms also eliminate the kingpin spring. Our Dana 60 High Steer Arms bolt onto the factory knuckle.
What is bump steer on a car?
What is bump-steer? Bump steer is when the front wheels move up and down, we want the front wheels to maintain a particular direction. It’s most important for the wheels to have minimal bump when negotiating turns. There are certain elements of the construction of the front end components that will make this happen.
What is a drag link flip kit JK?
The drag link flip flattens out the steering angles when combined with the lift heights of 2” and above providing better performing, more solid steering feel over the factory setup. To properly compliment the new steering angles provided by the drag link flip, a front track bar bracket is supplied.
What is a high steer setup?
High steer uses an IFS power steering box to steer side to side instead of the stock push and pull SFA box. You’ll need power steering for high steer. :wabbit2: crolison , 12-27-2011 06:02 AM. Registered User.
What is crossover steering?
Crossover steering is when the tie rod connects to each knuckle, rather then conventional steering where the tie rod connects to the knuckle on the drivers side, then to the drag link, which connects to the pass side knuckle.
Is bump steer bad?
Bump steer is when your wheels turn in and out or tow in and out, as your car moves up and down as if it were going over bumps. Now you can imagine that, at the very least, a car that turns and steers without you turning the wheel is a very bad idea, but on the racetrack, it can be downright dangerous.
How do you test bump steer?
If the front of the bump steer plate is moving towards the engine then you have a bump in condition. If the front of the plate moves away from the engine then you have bump out. The dial indicator will see small amounts so watch it carefully and note your results.
What is high steer?
Is cross over steering better?
You don’t have to have a lift and big tires to make the crossover steering a better option than stock. It’s a better option because it’s better. It’s not a poor design, just designed for something different. It’s not the lift that determines if you need it.