Do fuel rails add power?
Unless you plan on getting a turbo,there’s no point in buying one. The stock fuel pump is a constant pressure type, so even with a hi-performance fuel rail you will see no gains.
What should my fuel rail pressure be?
It is between 35 and 65 pounds per square inch (psi) on most vehicles.
Why am I not getting fuel to my fuel rail?
A plugged-up fuel filter will cause an engine not not start. Get a fuel pressure tester and hook it up to the fuel rail. If there is still no pressure, then replace the fuel filter and retest. If nothing after that, then the fuel pressure regulator is not working and needs replacing.
What is common rail pressure?
Common rail direct fuel injection is a direct fuel injection system built around a high-pressure (over 2,000 bar or 200 MPa or 29,000 psi) fuel rail feeding solenoid valves, as opposed to a low-pressure fuel pump feeding unit injectors (or pump nozzles). Common rail injection is widely used in diesel engines.
Where does the fuel rail go?
A fuel rail is high pressure tubing which takes fuel to the injectors in an internal combustion engine. The fuel passes from the fuel rail into the injectors in metal fuel pipes.
What kind of fuel rail does a SR20DET use?
Radium Engineering has NOT tested on any FWD SR20 intake manifolds. For the SR20DET S14/S15 fuel rail, go HERE. For the SR20VE go HERE. This S13 SR20DET fuel rail will also work on most aftermarket intake manifolds that use the OEM fuel rail (as shown below).
Why does the SR20DET have a catch can?
The SR20DET has been notorious for blow-by contamination through the intake tract, which can cause carbon solids to form and reduce fuel octane levels. By implementing a catch can, we give these heavy solids and contaminants a place to collect without returning back into the engine.
What kind of spacer do I need for fuel rail?
If so, then the Radium fuel rail will likely work as well. Lastly, 3 of the plastic OEM 5mm spacers (Nissan 17522-10V00) must be reused and placed under the included mounting brackets for thermal insulation and proper fuel rail height.
Can a radium fuel rail be converted to top feed?
The Radium fuel rail converts from side feed fuel injectors to top feed, allowing the use of high flow aftermarket fuel injectors. Fuel injectors are not included and not sold by Radium Engineering .