What are stage pins used for?
Uses. Stage pin connectors are generally used for conducting dimmed power from a dimmer to stage lighting instruments, although occasionally they can power other equipment.
What are the three different types of connectors used to provide power to lighting fixtures?
Generally, electrical power connectors are classified according to how much voltage they carry. There are three categories of electrical connectors: light-duty, medium-duty, and heavy-duty. Each category heading refers to how much voltage the connector can handle.
What is stage lighting cable?
Designed for the entertainment industry, our Stage Lighting Cable is used to provide temporary power at movie and TV sets, theatres, concerts, and other special events that require portable power, lighting and sound.
How do you wire a stage pin?
On a stage pin connector, the ground (green) conductor is attached to the middle pin. The neutral (white) is the pin closer to the ground, and the far pin is the hot (black). Notice that the ground pin is slightly longer than the others, so that it is the first to connect and the last to disconnect.
What is a Socapex used for?
Socapex is a brand of electrical connectors known in the entertainment industry for their 19 pin electrical connectors, commonly known as Socapex connectors. These can often be seen used in film television and stage lighting to terminate the ends of a multi cable.
Which countries use three pin plugs?
This electrical socket is common in: GB, Ireland, Cyprus, Malta, Malaysia, Singapore, Hong Kong, The Type G plug has three rectangular pins in a triangular pattern and includes a fuse (usually a 3A fuse for smaller appliances, such as computers, or a 13A fuse for larger appliances, such as heaters).
What are the four different kinds of cable plugs used in lighting?
Let’s dive into the common plugs and uses in the lighting world….The standards for these types of power are:
- 120v Dimmed Power – Stage Pin or Edison.
- 120v Non-Dim Power – Edison or PowerCon.
- 208v Non-Dim Power – L620 Twistlock or PowerCon.
- 3 Phase 208v Feeder – Cam Loks.
When wiring How do I tell which pin is the hot on a stage pin connector?
On a stage pin connector, the ground (green) conductor is attached to the middle pin. The neutral (white) is the pin closer to the ground, and the far pin is the hot (black).
What is an Edison plug?
An ordinary household electrical plug in the United States. Characterized by having two flat blades and a semi-round ground pin. There are several different variations on this theme: A plug rated at 20 amps will generally have one blade perpindicular to the other.
What kind of connector does a spotlight use?
Spotlights generally use 3- or 5-pin connectors. Both of these use the DMX standard control protocol, so they will integrate effortlessly into your current DMX system. Our selection also includes options that are sound activated for non-DMX systems. Some of our units come with both DMX and sound activation.
What kind of power cable do you need for stage lighting?
The last piece of cable we use for lighting is the feeder cable that connects all of our gear to the building power supply in the venue we are setting up in. This cable is typically Cam Lok cable, and is split into individual cables per conductor. That means, for a typical 3-phase power connection, you’ll have five Cam Lok cables to tie in.
How do you plug in Edison stage lights?
When using these bars, you can simply go from the dimmer rack to the bar and plug in Socapex on both ends. When using individual lights, you can use a Socapex fan out, also known as a break out. This cord takes the Socapex end and turns it into 6 circuits of Edison, Stage Pin, or L620.
Why are stage pins not plugged in well?
If you’ve been around stage lighting for awhile, you’ll probably know that stage pins don’t always plug together well, and that’s the reason why many people don’t like them. They’re either too loose and you have to tape them, or too tight and tough to get apart.