How do I know if my gearbox is M32 or F40?
F40 Diagram figure 2 – The gearbox number is located on the front of the gearbox. On some models this can be visible by opening the bonnet of the car and looking down the side of the battery compartment. M32 Diagram figure 1 – The engine number is located at the front at the engine/gearbox separating joint.
How much oil goes in a M32 gearbox?
The gearbox takes 2.4l of oil, however, once drained, 200ml remains in the box, therefore, you require 2.2l of new oil to change the oil.
Who makes the M32 gearbox?
The GM transmissions are usually numerically designated in Newton Metres. For example: The 6-speed M32 gearbox is fitted to the Opel/Vauxhall Astra VXR (pre-J model) and has a torque rating of 320 N⋅m (240 lb⋅ft) (hence ’32’ designation).
What is a M32 transmission?
The M32 gearbox is a 6 Speed manual gearbox manufactured by Getrag and is fitted to a wide range of vehicles, including the common commonVauxhall Astra, Vauxhall Astra VXR. Vauxhall Astra 1.9, Corsa VXR along with, Fiat Punto, Alfa Romeo 159 and Lotus. (
What cars use the M32 gearbox?
The M32 gearbox is used in many Vauxhall/Opel applications including Astra H VXR, 1.9 CDTi, 2.0 Turbo, the equivalent Zafira B models, Corsa D models including VXR and SRi Turbo, Astra J, Insignia, Meriva and Mokka .
How do I identify my Vauxhall gearbox?
tavimage said: by the end plate, on a lip, you will find a code stamped into it, it will start with A or B, have a 5 digit number, then F13/F17 (gearbox code), then a W or C (wide or close ratio), then a 3 digit number (final drive ratio).
What is the difference between M20 and M21 gearbox?
An M21 has a taller first and third gear than the M20. M21 was predominantly behind a 308 and M20 behindA 253.
What are gearbox bearings?
A gear bearing is a type of rolling-element bearing similar to an epicyclic gear. Gear bearings consist of a number of smaller ‘satellite’ gears which revolve around the center of the bearing along a track on the outsides of the internal and satellite gears, and on the inside of the external gear.
How do I know what gearbox I have?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
What kind of bearings are used in Vauxhall Astra?
TIMKEN M32 Gearbox Bearings. The M32 gearbox is used in many Vauxhall/Opel applications including Astra H VXR, 1.9 CDTi, 2.0 Turbo, the equivalent Zafira B models, Corsa D models including VXR and SRi Turbo, Astra J, Insignia, Meriva and Mokka .
Are there any problems with the M32 gearbox?
Then ‘Gen 1’ M32 Gearbox is the most common gearbox we see for repairs, with the main issue being related to 6th gear bearing as detailed above, A limited number were produced with bearing manufacturer change and guides added in 2010, however, these did not resolve the problems as they still utilise Gen2 larger Top bearings.
What are the bearings on the M32 transmission?
In the middle of 2012, General Motors gave the M32 transmission larger bearings and added oil galleries in the end case for better oil flow. The updated bearings are 62 mm in diameter, while the original ones were 55 mm. They are also much thicker (17.5 mm instead of 13.7 mm).
What are symptoms of 6th gear bearing wear in M32?
Below are the typical symptoms of the 6th gear bearing wear in the M32 gearbox: Whining noise in 6th and 5th gear. The noise may increase when you press the accelerator pedal and may decrease when you release it. Other gears may be noisy as well, but in the vast majority of cases, it’s just the last two gears.