Why is my bobbin not catching?
Check the upper thread. – Check to see if your upper tension is too tight. – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
How do I know if my timing is off on my sewing machine?
If your hook tip is passing through or below the needle eye, then the timing of the sewing machine is off. On the other hand, if the hook tip is passing above the needle eye, but extends past the needle more than a couple of millimeters when the needle eye meets the radius of the hook, then the timing is also off.
How do you fix bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
How do you tell if your bobbin tension is off?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
What causes a sewing machine not to stitch?
Machine is skipping stitches There are several possible reasons for your machine to skip stitches. If the top thread is not reaching the bobbin, the threads will not lock properly, resulting in a skipped stitch. Re-thread your machine, both top and bobbin threads, and test.
Why is my bobbin jumping?
There could be several reasons why the bobbin is jumping in the bobbin case. The thread was not wound properly on the bobbin. Wind the bobbin thread properly.
What to do if your bobbin thread is bunching?
How to Fix Bobbin Thread Bunching and Other Threading Problems Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through… Change the Needle. If you’re still having loopy bobbin thread, change the sewing machine needle. Be sure you are
Why is my needle not picking up my bobbin thread?
– Check to see if your upper tension is too tight. Standard tension setting is 4. – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread.
Where is the bobbin on a sewing machine?
Verify the bobbin spindle atop the machine is in the sewing position. Make certain the needle is installed with its flat side facing the back of its holder. Thread the needle and open the shuttle cover and pull out the bobbin to see if it is inserted in the correct direction in the shuttle and case.
What’s the best way to adjust the tension on a bobbin?
Check your owner’s manual to adjust both the upper and lower thread tensions correctly. Adjust the tension on the bobbin case by turning the small screw clockwise to tighten and counterclockwise to loosen.