How do I access my Cisco phone settings?

How do I access my Cisco phone settings?

Use Cisco Unified CallManager Administration to modify > Device > Phone > Phone Configuration. URL of the help text that appears on the phone. Use Cisco Unified CallManager Administration > > Device > Phone > Phone Configuration.

How do I reset my Cisco 7941 IP phone?

Cisco 7941 / 7961 phone Factory Reset:

1. Unplug the power cable from the phone, and then plug in the cable again: the phone begins its power up cycle.
2. Immediately press and hold # until the Headset/Mute and Speaker buttons flash in sequence: release #

How do you use a Cisco IP phone headset?

(Click the Headset button first, if necessary). When the Headset button is lit, Cisco IP Communicator operates in headset mode. Switch to a headset during a call Click the Headset button or enter the keyboard shortcut Ctrl + H. If you were using a USB handset before switching, you can turn it off or hang it up.

How do you answer a Cisco phone with a headset?

Incoming calls are automatically answered one by one on the phone as long as the headset light remains lit. For each ephone, you can specify one or more lines for headset auto answer. After a phone is configured for headset auto answer, the phone user must press the headset key to start auto answer.

What can I do with Cisco Unified IP phone 7970?

Your Cisco Unified IP Phone 7970 and 7971 provides touch-screen access, in addition to soft keys and dedicated buttons, allowing you to place and receive phone calls, put calls on hold, transfer calls, make conference calls, and so on.

Can a wireless headset be used with a Cisco Unified IP phone?

The wireless headset remote hookswitch control feature allows you to use a wireless headset with the Cisco Unified IP Phone. See the wireless headset documentation for information about connecting the headset and using the features. You can disable the headset by using Cisco Unified Communications Manager Administration.

How to connect a Cisco Unified IP phone?

To connect a handset to the Cisco Unified IP Phones 7975G, 7965G, or 7945G, plug the cable into the handset and into the Handset port on the back of the phone. To connect a handset to the Cisco Unified IP Phones 7971G-GE or 7970G, remove the hookswitch clip from the cradle area, as shown in the following figure.

What kind of cabling do I need for Cisco IP phone 7965g?

For the Cisco Unified IP Phones 7965G and 7945G, you can use either Category 3, 5, 5e, or 6 cabling for 10 Mbps connections, but you must use Category 5, 5e, or 6 for 100 Mbps connections. Use the SW network port to connect the phone to the network. You must use a straight-through cable on this port.