Why is my GE refrigerator too warm?
If your GE refrigerator or freezer is suddenly warmer than it should be then you likely have an issue with the main controller board. The controller board is the brain of the entire refrigerator so if the refrigerator or freezer is too warm then it is likely an issue with the main controller board.
Why is my GE Profile not cooling?
If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor.
Why is my GE fridge not staying cold?
Dirty Condenser Coils A refrigerator’s condenser coils help cool refrigerant, providing cool air for the refrigerator. However, if the condenser coils become coated in dust and debris, they won’t be able to cool the refrigerant adequately. When this happens, you may find the freezer ok but refrigerator not cooling.
How do you reset the thermostat on a GE Profile refrigerator?
Try to reset the control panel by temporarily switching off the power to the refrigerator. To reset the control, unplug the refrigerator or turn it off for 30 seconds on the circuit breaker.
Why is my fridge not holding temperature?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). Plug in the fridge and make sure the fan runs when the compressor is running.
How long does it take for a GE Profile refrigerator to cool?
Wait at least 24 hours for the refrigerator to sufficiently cool off when plugging in a GE Profile refrigerator. If you put items in the refrigerator before the fridge has cooled off, they won’t stay fresh.
How do I put my GE refrigerator in diagnostic mode?
Simultaneously press and hold all 4 temperature adjustment buttons for approximately 3 seconds. A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display.
How do I troubleshoot my GE refrigerator that is not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
What temperature should a GE refrigerator be set at?
40 °F
To ensure that your refrigerator is doing its job, it’s important to keep its temperature at 40 °F or below; the freezer should be at 0 °F.
How do you fix a fridge that is not cooling?
What does it mean if your GE refrigerator is too warm?
GE Refrigerator or Freezer too Warm? If your GE refrigerator or freezer is suddenly warmer than it should be then you likely have an issue with the main controller board. The controller board is the brain of the entire refrigerator so if the refrigerator or freezer is too warm then it is likely an issue with the main controller board.
How does the temperature go up or down on a refrigerator?
On models where you press the Fridge or Freezer pad to adjust the temperature (doesn’t have separate up and down selections), the temperature adjustment only goes in one direction. When you keep pressing the Fridge or Freezer pad, the temperature setting will go up until it reaches the maximum limit and then starts over at the lowest limit.
What kind of Control Board does a GE refrigerator use?
General Electric WR55X10942 Refrigerator Main Control Board is common in GE, RCA, Monogram, and Hotpoint brands. Installation instructions are included.
Why is my freezer cold but my Refrigerator is warm?
If the evaporator coils are frosted over, test each component of the defrost system. The evaporator fan motor draws cold air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately.