What is the torque specs for the spindle axle nut?
For one-piece spindle nut systems, torque the nut to a minimum of 300 ft-lbs. Do not back off the spindle nut. Engage any locking device that is part of the spindle nut system. If the locking device cannot be engaged when the nut is at 300 ft-lbs, advance the nut until engagement takes place and the nut is locked.
What is the torque on the front axle?
The front axle nut torque spec is considerably lower than the rear axle nut. The factory service manual lists the front axle torque spec as 70 to 75 foot pounds.
What is the torque when tightening wheel end nuts?
The general rule for steel wheel lug nut torque is usually around 80ft/lb, and for aluminum wheels it is around 100ft/lb, this being said you still need to check on the manufacturer’s specifications. Drive safe and secure, get your wheels checked.
Do you need to torque axle nut?
Proper torque secures the axle nut and keeps the proper load on the hub assembly. Proper torque is critical for two reasons. First, it secures the axle nut so it won’t work itself loose and back off. Second, the proper torque keeps the correct load on a hub assembly needed for longer bearing life.
What is axle nut?
Lori Kilchermann. The design of the typical front-wheel drive axle involves the use of the axle nut to firmly hold the drive axle inside of the front wheel hub. An axle nut socket is a tool used to remove the axle nut on front-wheel drive as well as certain four-wheel drive vehicles.
What is the front hub bearing torque specs?
The torque specifications for GM wheel hubs generally range between 107 to 225 foot-pounds, depending on the year and model.
How much torque do you need for lug nuts?
New wheels should be re-torqued after the first 50 to 100 driving miles.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
| 1/2 in. | 75 – 85 | 8 |
| 9/16 in. | 135 – 145 | 8 |