What does a blinking power light on a Panasonic TV mean?
Your Panasonic TV’s power light blinks when you power it off or on, or put it in Stand-by mode. For example, when you use the remote control to turn the TV off, the Power LED Indicator blinks orange for about 90 seconds until the cooling fan stops running. The Power LED Indicator should illuminate as a solid red color.
Why is my Panasonic TV power light blinking 10 times?
This is what I get from the Panasonic 9th generation plasma: If any of the SUB or MAIN voltages that are highlighted on the DG Board is missing, the unit goes into shutdown. The power LED blinks ten times. If any of the voltages created on the PA Board is excessive or shorted, the unit goes into shut-down.
Why is my Panasonic TV not turning on?
Most problems with your Panasonic TV are solved by performing a firmware update, hard reset or factory reset. You can also check the remote or power supply if it won’t turn on, or the TV’s input cables or settings if there is no sound or picture. Otherwise, it may be broken or faulty hardware.
Does a Panasonic TV have a reset button?
With that in mind, do Panasonic TVs have a reset button? Press the menu button on the remote control of the Panasonic TV. Another list of options appears below the audio option. Select Reset to restore the bass, treble and balance settings to their factory defaults.
Why is my TV light on but not turning on?
Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power. Power the unit back up and see if you can see any imagery.
Why does my Panasonic TV not turn on?
The power LED blinks ten times. If any of the voltages created on the PA Board is excessive or shorted, the unit goes into shut-down. The power LED blinks ten times. Here is a training manual for the Panasonic 9th gen Plasma TV. It will show you all the testing points as well as ideas of where to look for the error on your TV.
What to do when your plasma TV won’t turn on?
Here is the simple 5 step process we follow when this happens to our plasma tv. It works every time. 1) Completely unplug EVERYTHING connected to the tv, including HDMI cables 2) Press and hold the power button on the tv for 10 seconds 3) Plug power cord ONLY back in to TV 4) Turn tv on.
How to solve the Panasonic LCD red light blinking problem?
Panasonic lcd tv Red light blinking problem. Then on the side of the set, holding the down program arrow button in and pushing and holding the on/off switch in until the remote light blinked green, keep holding it until the set came on. This was about 30 seconds. It worked. I notice that it now takes longer to get the set to start,…
How many times does power light blink on Panasonic 9th Gen TV?
The power LED blinks ten times. Hereis a training manual for the Panasonic 9th gen Plasma TV. It will show you all the testing points as well as ideas of where to look for the error on your TV. As with any TV, be careful of anything high voltage and watch yourself.