What are the views in technical drawing?
The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.
What are the 3 views of a drawing?
Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view. Other names for these views include plan, elevation and section.
What are the names of all 3 views in a technical sketch?
Figure 8.11 Multiview Drawing of an Object For this object three views are created: front, top, and right side.
What are the different views of a drawing?
Types of Drawing Views
- Base View. The first view created in a drawing.
- Projected View. An orthographic or isometric view that is generated from a base view or other existing view.
- Auxiliary View. A view projected perpendicular to a user-selected line or edge.
- Section View.
- Detail View.
- Overlay View.
- Draft View.
What are the types of views?
Types of Views
- General – A view that you orient and is not dependent upon any other view for its orientation.
- Projection – An orthographic projection of an object as seen from the front, top, right, or left.
- Auxiliary – A view created by projecting 90 degrees to an inclined surface, datum plane, or along an axis.
What are the 6 principal views of an object?
What are the six principal views of an object? Front, top, right side, left side, rear, and bottom.
What are standard views?
Standard views are those typically used in engineering drawings and are one of two view types used as foundations for supporting views – the other is the General view. There are two angle projection methods for determining standard view placement on a drawing: first angle and third angle. …
What is top view in engineering drawing?
Horizontal plane of projection. Horizontal plane of projection is the plane onto which the Top View of the multi-view drawing is projected. Top view of an object shows the width and depth dimensions.
What are the four different type of view?
What are the two main types of projection?
| 1) | Parallel and Convergent |
|---|---|
| 2) | Perspective and Parallel |
| 3) | Parallel and Orthographic |
| 4) | Station-point and Perspective |
| 5) | NULL |
What are the six 6 principal views of projection?
surfaces of the object positioned so that they are parallel to the sides of the box, six sides of the box become projection planes, showing the six views – front, top, left, right, bottom and rear.