How do I allow FTP through firewall?

How do I allow FTP through firewall?

How to allow an FTP server through Windows Firewall

1. Open the Start menu, do a search for Windows Firewall, and press Enter.
2. Click the Allow an app or feature through Windows Firewall link.
3. Click the Changes settings button.
4. Select FTP Server and make sure to allow it on a Private and Public network.
5. Click OK.

How do I access my FTP server behind my router?

NOTE: Images may vary depending on the model and firmware version of your Linksys router.

1. Access the router’s web-based setup page.
2. On the Setup page, click Applications & Gaming.
3. Under Single Port Forwarding sub-tab, select FTP for Application.
4. Enter the IP Address of your FTP server under To IP Address.

How do I forward an FTP port on my router?

To configure the FTP server, you must first forward port 21 to the LAN IP address of the device. Ensure to forward incoming traffic from port 8080 (default management port) to the LAN IP address of the device to remotely connect to the device.

How do I setup my FileZilla FTP server behind my router?

Log on to the FileZilla Server Interface.

1. Open Settings from the Edit menu.
2. Press Passive Mode Settings.
3. Check Use custom port range and specify 980-989.
4. Press Use the following IP and type the server’s public IP into the textbox.
5. Go to SSL/TLS Setttings.
6. Check Enable FTP over SSL/TLS support (FTPS).

What is my IP FTP server?

Log in to the control panel of your website. Using this method, you will need the username and password to access the account. The FTP address should be listed in the FTP account section of the control panel.

How do I setup a NAS FTP server?

3. Accessing Files via FTP clients

1. Open your preferred FTP client (such as FileZilla).
2. Enter the IP address or DDNS hostname of your Synology NAS in the Host field.
3. Enter your Synology NAS username and password.
4. Enter the port number your Synology NAS uses for FTP services (the default port number is 21).

How to install FTP service on Windows Server 2008?

To install the FTP service on Windows Server 2008 On the Start menu, click Administrative Tools, and then clickServer Manager. In the Server Manager Pane, in the Roles Summary section, clickWeb Server (IIS). In the Web Server (IIS) section, click Add Role Services.

How to configure Windows Firewall to allow secure FTP traffic?

To configure Windows Firewall to allow secure FTP over SSL (FTPS) traffic, use the following steps: Open a command prompt: click Start, then All Programs, then Accessories, then Command Prompt. To configure the firewall to allow the FTP service to listen on all ports that it opens, type the following syntax then hit enter:

How do I enable FTP server in IIS 7?

1. Go to IIS 7 Manager. In the Connections pane, click the server-level node in the tree. 2. Double-click the FTP Firewall Support icon in the list of features. 3. Enter a range of values for the Data Channel Port Range. 4.

What’s the default port range for a FTP server?

Step 1: Configure the Passive Port Range for the FTP Service. The valid range for ports is 1024 through 65535. (Ports from 1 through 1023 are reserved for use by system services.) You can enter a special port range of “0-0” to configure the FTP server to use the Windows TCP/IP dynamic port range.