Why is the sound going in and out on my LG TV?

Why is the sound going in and out on my LG TV?

Check if the TV Sound Out is set to TV Speaker. Check if the correct input is selected on the TV. Check if the TV volume is set to the correct level and not muted. If the external source, such as a cable or satellite box has a volume control, check if the setting is muted or set at a low volume.

How do I change the audio output on my LG TV?

1. on the remote control and select Settings > SOUND > Sound Out, then press Wheel or Enter. 2. Depending on the method of connection for external audio, this will be either: Optical Digital Audio Output (Optical cable) or HDMI/ARC (HDMI cable).

Why is the sound on my TV going in and out?

Intermittent audio can be electronics in the Review, bad cable or contacts, or the TV itself. Start by reseating the HDMI cable at both ends; check to see if the contacts are dirty. Use another HDMI source (borrow if you don’t have one) to see if it’s the Review. Finally, see if another HDMI TV eliminates the problem.

Why does the sound on my TV keep going up and down?

The most common reason behind your TV automatically lowering your volume has to do with its board volume control malfunctioning. In order to fix it, you will need to remove the back of your TV. Use the TV’s remote to control the TV. If the issue is resolved, then your manual control board/button is acting up.

How do I switch my LG TV to external speakers?

[LG TV] How to play audio through internal/external speakers on your LG webOS TV

1. Press the ‘Setting’ button on your LG TV remote control.
2. Select ‘All Settings’ using the ‘OK’ button on your remote control.
3. Select the ‘Sound’ menu.
4. Select ‘Sound Out’ . This is where you can choose how sound is outputted through your TV.

How do I change the Audio output on my TV?

Press the (Quick Settings) button or HOME button on the supplied remote control: Select Settings. Under the TV category, select Sound, Display & Sound or BRAVIA Settings. Select Audio output.

How do I turn on the optical output on my LG TV?

Settings

1. On your TV, press the home key > Settings > Advanced.
2. Click Sound > Sound Out > Optical.

How do I hook up external speakers to my TV?

If your TV doesn’t use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.

Why does my LG surround sound cut out?

It can be caused by Bluetooth interference or sound bar is operating without a rear satellite kit while signal source is configured to deliver true surround sound. There is no solution to the former other than hardwiring at times of heavy Bluetooth device traffic in the vicinity.

What kind of audio output does a LG TV have?

LG Optical Audio or Multi-channel Audio Output The Optical Digital Audio Output or HDMI/ARC Multi-channel Audio Output is available as PCM or Auto. DTS Audio is not supported on current LG Televisions. PCM – Used for simple systems, sound bars or 2.1 systems.

How do I connect my speakers to my LG TV?

First, take your RCA cables and connect them via the audio output of your LG TV. Next, you’ll take the opposite ends of those cables that correspond to the audio outputs on your device (your soundbar, home theater receiver, or powered speaker).

Why does my LG TV have no audio?

No Audio Performing a simple Sound Test reveals potential audio problems with the TV speakers or audio circuitry. Press the Settings button on the LG remote control and select All Settings > Sound > Sound Test. The Sound Test generates audio output to the TV.

How do I get optical audio out of my LG TV?

1. Press the SMART button on the remote control and select Settings > SOUND > Sound Out, then press Wheel or Enter. 2. Depending on the method of connection for external audio, this will be either: Optical Digital Audio Output (Optical cable) or HDMI/ARC (HDMI cable).