How many different types of interface does a 1841 router have?

How many different types of interface does a 1841 router have?

A. The Cisco 1841 router has two onboard Fast Ethernet autosensing interfaces that support 10- or 100-Mbps connections.

What is a 1841 router?

The Cisco 1841 router (Figure 1) is designed for secure data connectivity and provides significant additional value compared to prior generations of Cisco 1700 Series routers by offering more than a fivefold performance increase and integrated hardware- based encryption enabled by an optional Cisco IOS® Software …

How do I check my router configuration?

Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter. That’s your router, and the number next to it is your router’s IP address.

Which port on the Cisco router is typically used to connect an external analog modem?

auxiliary port
Modems should always be connected to the auxiliary port. When a modem is connected to the auxiliary port, a remote user can dial in to the router and configure it.

Which module is used for router to router connection?

The router and the optional power-over-Ethernet (PoE) module should be mounted before being connected to the devices.

Which router is best in Cisco Packet Tracer?

Cisco 829 ISR router Cisco 829 Industrial Integrated Services Routers provide highly secure, reliable, and easy-to-manage 3G/4G LTE WAN cellular and Wireless LAN connectivity for mobile environments.

How do I reset my Cisco 1841 router?

How do I default or reset a Cisco router?

1. Connect the console cable to Router 1841.
2. Use the power switch in order to turn off the router, and then turn the router back on.
3. Press Break on the terminal keyboard within 60 seconds of power up in order to put the router into ROMMON.

What is Cisco 2800 series router?

Cisco 2800 Series Integrated Services Routers (ISRs) combine your data, voice, video, and wireless services onto a single secure device you can count on and offer modularity so you can add new hardware to meet your changing business needs.

How do I show all configuration on a Cisco router?

On Cisco Router/Switches:

1. Type “terminal length 0” in privileged mode to set your terminal to display without any breaks.
2. Type “show run” or “show start” to show the applicable config.
3. To display the config without lengthy certificate data, use “show run brief “.

How do I check my cisco router settings?

Show running-config: To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command.

How do I configure a Cisco router?

9 Steps to Setting Up a Cisco Router

1. What You’ll Need.
2. Connect the router to the PC, and start a terminal emulation program.
3. Identify the router’s interfaces.
4. Configure IP addresses.
5. Set up access lists.
6. Configure basic TCP/UDP/ ICMP inspection.
7. Apply the access lists and inspection rules.
8. Set up NAT.