How do you drain a Bosch Nexxt washing machine?

How do you drain a Bosch Nexxt washing machine?

Here’s how to drain water from a Bosch washing machine drain hose:

1. Turn off the washer’s water tap or valve.
2. Unplug the washer.
3. Open and remove the service flap on the bottom right corner of the washer.
4. Unfasten the black drainage hose.
5. Place a shallow container under the hose to capture draining water.

Why is my Bosch washer not draining?

A Bosch washer not draining properly is often due to a drain hose obstruction. Blockages are often due to kinks in the hose or clogs formed by lint, debris or foreign objects that restrict water flow. Straightening the hose to remove the kink may restore water flow.

How do I clear a clogged washing machine drain?

To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.

What happens if washing machine filter is blocked?

A clogged filter limits the washing machine’s efficiency and can also lead to more lint deposits on clothes as well as poor drainage. The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue.

How do you reset a Bosch 500 series washing machine?

How to Reset a Bosch Washer

1. Turn the cycle selector to the “Off” position.
2. Turn the cycle selector to a new cycle. A light will begin to flash.
3. Press the “Start/Pause” button to begin the new cycle.

Why is my washer not draining completely?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.

How do I know if my washing machine drain hose is clogged?

If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.

Can you pour Drano down washing machine drain?

Can I put Drano down my washing machine drain? Yes. Drano or any drain cleaner can be used to unclog your washing machine drain, but make sure you run your washer without a load of laundry before normal use.

What to do if your Bosch washer won’t drain?

The switches should have continuity according to their design. If the washer won’t drain the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.

What to do if your Kenmore washer won’t drain?

Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design. If the washer won’t drain water check the drain hose. Be sure the hose did not get kinked behind the washer. Also, remove the hose from the pump and check it for obstructions.

Why does my washer not spin or drain?

If the washer won’t drain the pump belt might have broken or might have worn out. Check the belt and replace if it shows signs of excessive wear. If the washer won’t drain water the drain pump might be defective. It’s also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose.