What are the parts on my electric guitar?
The parts of an electric guitar are:
- Body.
- Neck.
- Fingerboard / fretboard.
- Truss rod.
- Headstock.
- Frets.
- Bridge.
- Tailpiece.
What are the parts of an electric guitar and what do they do?
The Electric Guitar Body This includes the pots, bridge, pickups, output jack, selection switch, and vibrato arm. The strap buttons and pickguard are both also normal components you’ll find somewhere on the body. The body can be found in solid, semi-hollow, or hollow versions.
What are the parts called on a guitar?
Every guitar is a little different, but there are three fundamental parts — the headstock, the neck, and the body.
What are the 10 parts of a guitar?
Guitars With Labelled Parts
- Body. The body, I suppose, could be described as the ‘big curvy bit’ of a guitar, which rests against your body when you play, and sits underneath the strings where you typically strum them.
- Neck.
- Fingerboard/ Fretboard.
- Frets.
- Inlays.
- Headstock.
- Tuners/ Tuning Pegs/ Machine heads.
- The Nut.
What is the plate on the back of a guitar called?
A pick guard (also known as a scratch plate) protects the body of the guitar at the point of most contact. Some electric guitars have raised pick guards so your pick is directed out and away from the pots and strings.
What is the lever called on a electric guitar?
It uses a lever (“vibrato arm”) attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily.
What does a pick guard do?
A device applied to the surface of a guitar (or bass, etc.) to protect its finish from scratches that may occur due to picks scraping across the top while playing. Pick guards are usually made from some type of plastic, although metal and other materials are sometimes used.
What does the stick on an electric guitar do?
The Chapman Stick is an electric musical instrument devised by Emmett Chapman in the early 1970s. A member of the guitar family, the Chapman Stick usually has ten or twelve individually tuned strings and is used to play bass lines, melody lines, chords, or textures.
What is the black thing on a guitar called?
The Bridge
The Bridge: The black part of the guitar on the other end of the strings is the bridge, and is usually glued on top of the body.
What does the pick guard do?
What are the 20 parts of guitar?
There are over 20 parts that your guitar is made up of and these include Tone Woods, Headstock, Machine / Tuning Nuts, String Trees, Truss Rod, Volutes, Nut, Neck, Fretboard, Strings, Action, Neck Joint, Heel, Body, Strap Button, Scratch Plate, Pickups & Sound Hole, Electric & Controls, Bridge, Tail Piece, Intonation.
What are the basic parts of a guitar?
Parts of the Guitar
- Body – The main part of the guitar.
- Neck – The neck sticks out from the body and connects to the headstock.
- Headstock – The top of the guitar where the tuning pegs sit.
- Strings – The standard guitar has six strings.
- Frets – Hard metal strips that are installed into the fingerboard on top of the neck.