How do I fix a fuser error on my HP printer?

How do I fix a fuser error on my HP printer?

Solution one: Reset the printer

1. Press the Power button to turn off the printer.
2. Disconnect the power cord from the rear of the printer.
3. Wait 30 seconds, and then reconnect the power cord.
4. Press the Power button to turn on the printer. Wait for the product to start.
5. Try printing again.

How do you fix a 50.2 fuser error?

Simple Steps to Correct 50.2 Fuser Error on HP LaserJet Printers

1. Turn your printer off and unplug it.
2. Remove the fuser and reinstall.
3. Gently rock the fuser back and forth to make sure is secure.
4. Plug the printer directly into a wall socket.
5. Turn the printer back on.

How do you fix a 50.0 fuser error?

50 error is a fuser error and means the fuser needs to be replaced. Do a search for the part on google and then see if it is worth repairing based on cost of the fuser and if you will need to hire someone to replace it for you.

How do you fix a 50.4 fuser error?

For a temporary fix, you can try turning the printer off and back on again, sometimes the reboot will reset the fuser so you can continue printing a few more pages. If the 50.4 Fuser Error returns, you should replace the fuser.

What causes fuser error in HP printer?

If the fuser is not connected correctly to the printer, it causes a fuser error 50.3. So, verify that the thermistor connection in the fuser area is firmly connected. If the fuser is connected firmly, check if the fuser is of correct voltage for your machine. Step 5: Check the fuser settings.

What causes fuser error in printer?

923 Fuser Error: The printer thinks the fuser unit is overheating or heating up too fast. As a customer, the only action you can take is to power the printer off and on and see if anything is jammed within the fuser unit. If you are a technician working on a printer, check the fuser unit for any shorted components.

What is fuser error 50.2 in HP printer?

The 50.2 fuser error message is a “Slow Fuser” error, which is a time-out error where the fuser is not warming up fast enough. If the 50.2 Slow Fuser error message returns, it’s time to replace your fuser.

What is fuser error on HP printer?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. If the fuser error returns, you can try reinstalling the fuser unit.

What is hardware fuser error?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. The first thing to do for any fuser error is to power off the printer.

What is fuser in printer?

The fuser unit is a very important component of laser printers. The fuser unit, which is essentially two heated rollers, uses pressure and heat to fuse the toner powder onto the paper. Depending on your printer model, the fuser unit may be sold separately or it may be included in the printer’s maintenance kit.

What is a 50.2 fuser error?

50.2 error indicates that the printer is not heating up fast enough. This can be caused by a bad heating element in the fuser but can also be caused when the printer does not have adequate power due to overloaded circuits or being plugged into a power strip or surge bar that limits current flow.

What to do if you get an error message on your fuser?

02-21-2012 07:30 AM – last edited on ‎02-21-2017 05:05 PM by OscarFuentes The product has experienced an error with the fuser unit. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If you still receive the message follow the steps below. 1.

What to do if your HP printer fuser fails?

Plug the printer directly into the wall socket and turn the printer power on. If the error message persists after restarting the printer, the fuser needs to be replaced. contact HP support: www.hp.com/go/support. Loading… Loading… Loading… Loading…

What does error code 50.5 on a laser printer mean?

Laser printer fusers adhere toner powder to a page using a combination of heat and pressure. Error 50.5 occurs when the fuser fitted physically but the printer has specifically identified it as wrong. 50.5: Faulty Fuser.

What should I do if my HP printer says 50.xx?

It does not contain all of the possible error codes for HP LaserJet Pro printers. The following are some common fuser control panel messages and event codes for HP LaserJet printers. If a 50.xx error message appears on the control panel, try the following steps. Turn off the power by using the power switch, and then wait at least 30 seconds.