Why is my HDMI not working on my ps3?

Why is my HDMI not working on my ps3?

There could be an issue with your HDMI cable. Try another HDMI cable and make sure it is PS3 compatible (version 1.3 or higher). Some TVs have multiple HDMI channels so flick through them and make sure you’ve tried all channels.

Why isn’t my Vizio TV HDMI working?

If your Vizio TV’s HDMI port is not working, the most successful fix is to perform a hard restart by unplugging it from the power. Alternatively, you may need to replace the HDMI cable or port, change the device display settings, update your firmware or perform a factory reset.

Why does my TV say no signal when HDMI is plugged in?

Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. Try a new or another known working HDMI cable.

Why won’t my PS3 connect to my Vizio TV?

In many cases the reason that you cannot see any video is because your display settings or resolution is set to a level that isn’t compatible with your VIZIO TV. To fix this issue you will need to adjust these settings inside the Playstation 3. Turn off the power to the PS3 and then turn it back on. …

Why does my Vizio keep saying no signal?

This is because the no signal issue can occur when Vizio TV is set to the incorrect input channel. For instance, if the Vizio TV is connected with HDMI 1, try using the HDMI 2 input channel and vice versa. Once the correct input channel is selected, reboot the Vizio TV, and the signal issue will be fixed!

Why does my Vizio TV say no signal?

How do I fix HDMI no signal?

Follow these steps:

1. Unplug all TV/monitor from the HDMI ports.
2. Unplug the power cable from the TV or monitor for about 10 minutes.
3. Plug the power cable back in the TV or monitor.
4. Plug one device to one HDMI port of your PC.
5. Turn on the device.
6. Repeat steps 4-5 for each device and HDMI port.

Vizio TV Says No Signal When HDMI Is Plugged In The ‘No Signal’ message that comes up on your Vizio TV is a sign that the HDMI is not being recognized. The troubleshooting steps listed throughout this article should fix the problem. If none of these methods have worked, you may need to contact your local Vizio support.

What should I do if my Vizio HDMI is not working?

Alternatively, you may need to replace the HDMI cable or port, change the device display settings, update your firmware or perform a factory reset. I will guide you through the correct way to restarting your Vizio TV below, so that you can use your HDMI ports again.

Where is the lable on a Vizio TV?

Each port on the back of the TV will have a lable. Typically it will say TV, Comp, HDMI 1, HDMI 2, etc. Take a peak- and note what the name of the port your device is connected to is. Now, grab your VIZIO remote and press the Input key.

How can I tell if my Vizio TV is compatible?

You can find which resolutions are compatible with your Vizio TV in the user manual. Once you know which resolution will be accepted by the TV, navigate to the display settings on your device, whether it is a DVD player, laptop, gaming console or other streaming device.