Will a 1994 4L60E transmission interchange?
None of the ’93 -’97 4L60E’s are directly interchangeable, except ’93 and ’94!!! Here’s a list of yearly differences that will show you why. Yes, some years will fit in others and may not even throw a code, but there will be an issue in the long run.
What year 4L60E are compatible?
What years does 4L60E transmission fit?
Year Ranges | Transmission | Pan/Filter |
---|---|---|
1994-1996 | 4L60E | Shallow |
1997 | 4L60E | Shallow – Early Deep – Late |
1998-2000 | 4L60E | Deep |
2001-2003 | 4L60E/4L65E | Deep |
Will a 98 4L60E fit a 94?
Yes, some years will fit in others and may not even throw a code, but there will be an issue in the long run. The 4L60E ran from 1992-1997. thanks for any help. If it doesn’t have PWM, use the 94 transmission.
What transmission is compatible with 4L60E?
The front face 4L60-E is natively compatible with either the Chevrolet 90 degree “Small Block” & “Big Block” patterned engines (image, left), including the V6, V8 & I6.
How can you tell the difference between a 4L60E and a 4L60?
The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.
Will a 99 4L60E fit a 96?
4l60e’s are pretty much all compatible excet between the pwm trans and the non pwm. bfj_88 said: non pwm trans will not work in any 96 and newer trucks. the torque converter will slip the clutch and the valvebodies are different.
What is the difference between a 4L60 and a 4L60E transmission?
The biggest difference between the 4L60 and 4L60E is how both are controlled. For 4L60E control comes from a computer. For the 4L60, control comes form a TV cable. With one being controlled by computer and the other not, there are compatibility issues that the two have.
What transmission is in 1994 Chevy Silverado?
4L60E
Chevrolet Silverado 1993-1994 Rebuilt Transmission 4L60E.
Are all 4L60E the same?
Are 4L60E transmissions the same? No they are not. More importantly, not all 4L60E transmission are compatible with one another.
Will a 4L60E work without computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. Never mind TCC lockup; without a computer, the trans won’t shift at all.
Is a 4L60E interchangeable with a 4L80E?
FYI – 4L60E & 4L80E transmissions are NOT directly interchangeable. The wiring pinout of the trans plug is different, and 2 VSS’s are used versus 1 on the 4L60E. Besides the wiring difference, the ECM also requires a segment swap as that portion of the transmission control is completely different.
Are all 4L60E transmissions the same?
4L60E transmission bellhousings are not the same. One of the main differences in the earlier and later 4L60E transmissions is the bellhousing area. In the earlier versions, the case was cast as on piece of aluminum. In the later versions of it had a removable bellhousing.
Are all 4L60E’s the same?
All 4L60E transmissions are not the same . Here are some of the main differences. What parts of the 4L60E transmission are the same? The length of the total transmission stayed the same for its entire production cycle. This means that a 4L60E made in 1993 would theoretically bolt behind one that was made in 2003.
Does the 4L60 have overdrive?
The 4L60 was manufactured by General Motor’s Corporation and was available from 1990 to 1992. The 4L60 was the first automatic overdrive transmission specifically designed for rear-wheel high performance applications.