How do I reset my Epson waste pen pad?

How do I reset my Epson waste pen pad?

Steps to reset Waste Ink Pad Counter on Epson Printers

1. Extract the archived files using WinRar.
2. Open the .exe file in order to run the utility and select the Epson printer type.
3. After selecting the printer model, click OK.
4. In the Maintenance section, select Waste ink pad counter and press OK.

How do I reset my Epson printer manual without Resetter?

METHOD NO. 1

1. STEP 3: Once turned off, wait for five (5) seconds.
2. STEP 4: Press and hold the pink button.
3. STEP 5: Press the pink button for about 10 seconds.
4. STEP 1: Press the power button (this will turn off your printer)
5. STEP 2: Wait for 10 seconds.

How do I reset my Epson software?

How to Use Epson L360 Resetter Tool

1. Download the resetter from the above download link.
2. Turn off / Disable your antivirus protection for a while.
3. Unzip / Extract the Epson L360 Resetter Tool zip file into a folder.
4. In the Epson L360 extracted folder double click ‘Adjprog.exe’ to run the program.

How do I reset my Epson ink cartridge without Resetter?

Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

Where is the reset button on an Epson ink cartridge?

Find the Cartridge Reset Button. Turn the ink cartridge to where the microchip can be found. Using the end of a paper clip, press the reset button that can be located above the metal contacts, right in the center.

How do you reset the waste ink pad on an Epson l805?

Select ‘Waste ink pad counter’ and then click ‘OK’. In this window, click on ‘Main pad counter’ and ‘Platen pad counter’ checkboxes and then click ‘Initialize’. In this pop-up window click ‘OK’ to start initializing waste pads. Once initializing is done, click ‘Finish’ and close the program.

How do I reset my Epson L355 ink pad?

To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero. The process should be instant and you should immediately see a dialog box popping up.

Where is the reset button on Epson printer?

Press and hold the reset button on the back of the printer (located to the right of the ethernet port) for approximately 10 seconds, and release.

How do I reset my Epson printer to factory settings?

To Factory Reset an Epson printer:

1. Turn off the printer.
2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
3. Turn on the printer while holding the reset button.
4. Wait until a message prints indicating that the printer is resetting.

How do you trick Epson ink cartridges?

Shaking the Printer Cartridges Unplug the printer from the power source and wait at least five minutes for the printer memory to reset. Shake each cartridge a few seconds to redistribute the ink inside. Reinstall the cartridges in the same order as each was removed and then restore power to the printer.

When to use maintenance Reset Utility on Epson printer?

The Maintenance Reset Utility can only be used once and will allow printing for a short period of time. You may download the Maintenance Reset Utility when you receive the following message on your PC: A part inside your printer is at the end of its service life.

Can you reset waste ink counter in UK?

Waste Ink Counter reset utility for Epsons. On a TV programme (Watchdog) in the UK this Tuesday was a feature about how Epson UK (and for that matter, EU countries too) were not able to access the utility provided by Epson USA to reset the Waste Ink Counter.

What should I do if my Epson printer stops printing?

The printer will stop completely after a certain amount of prints (overflow), normally requiring you to take your printer to an Epson dealer for servicing and resetting. The service maintenance that would then be carried out is the draining / replacement of the ink pad that catches all the waste ink and resetting of the protection counter.

When to replace an Epson printer out of warranty?

Most consumers who are out of warranty elect to replace a lower-cost printer when they receive an end of life service message. In most cases, when this message occurs, other printer components also may be near the end of usable life and satisfactory print quality cannot be maintained.