What is bulkhead Swagelok?
Description. Swagelok Bulkhead Reducing Union, 1/4 in. x 1/8 in. Swagelok bulkhead fittings are available for same-size tubing (bulkhead unions), to reduce one size tubing to another (bulkhead reducing unions), or to adapt tubing to pipe thread (bulkhead male or female NPT).
Is Swagelok a union?
Tube OD, Swagelok (SS-600-6) : Industrial & Scientific….Enhance your purchase.
| Material | Stainless Steel |
|---|---|
| Connector Type | Union |
Can you reuse Swagelok fittings?
One of the many advantages of the Swagelok two-ferrule fitting design is the ability to re-use the body without leaks. If you have made changes in the system design, by moving a fitting to a new location or changing the tubing, you can’t re-use the nuts and ferrules, but you can still re-use the fitting bodies.
What are Swagelok fittings used for?
Swagelok tube adapters can help you shrink assembly size, fitting inventory, installation time and labor costs as you simplify installation and eliminate difficult alignment problems and potential leak points.
Is swagelok a compression fitting?
Why Swagelok is one of the most successful compression tube fitting manufacturers in the world. We pride ourselves in focusing on two important aspects: High quality products, which we continuously improve. Customer-oriented support and services.
What pressure are Swagelok fittings rated for?
2600 psig
The allowable working pressure at –20 to 100°F (–28 to 37°C) is 2600 psig (Table 3, page 4 of the Swagelok Tubing Data sheet).
Is Swagelok a compression fitting?
Do Swagelok fittings come with ferrules?
Swagelok’s flagship product is our tube fitting, designed to provide a leak-tight seal for pressures up to the suggested allowable pressure rating of the tubing. It is a two-ferrule, mechanical-grip, hinging-colleting type connection consisting of a fitting body, a nut, a front ferrule, and a back ferrule.
Can Swagelok fittings be used on copper?
The short answer is like material goes with like material. Match stainless steel ferrules and fittings with stainless steel tubing, brass fittings and ferrules with copper tubing, and plastic fittings and ferrules with plastic tubing.
How tight should Swagelok fittings be?
While holding fitting body steady, tighten the plug one-quarter turn from the finger-tight position . For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tube fittings, tighten the plug one-eighth turn. For over 1 in. and over 25 mm tube fittings, tighten the plug one-quarter turn.
What type of fittings are Swagelok?
Tube Fittings and Adapters Swagelok tube fittings deliver a leak-tight, gas-tight seal in an easy-to- install, disassemble and reassemble form. The robust tube grip with patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes.