What is batten molding?
Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section, used to cover seams between panels of exterior siding or interior paneling.
What is the trim at the top of cabinets called?
Crown molding
Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.
What is the molding under cabinets called?
Molding at the bottom of the base cabinet doors and above the toe kick is also known as bottom molding. This molding can be used on kitchen islands to make them appear more like furniture.
What is board batten trim?
First of all, board and batten basically just means putting wood/mdf strips on your wall in a pattern or design! I love it because is an affordable way (only$150!) to give a space character, add a focal point, and elevate your space.
What kind of wood is used for board and batten?
Cedar is a good lumber choice because it is soft; harder wood, such as pressure-treated pine, will not seal as well and is more likely to crack. Board and batten is commonly used in farmhouse style homes, but it also looks well with minimalist, modern, and transitional styles.
What is the difference between molding and trim?
This is a common question, and the answer is pretty simple. TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …
What does scribe molding look like?
Scribe molding is a thin strip of wood that covers gaps or inconsistencies where the cabinet meets the ceiling or wall. The piece of wood is typically straight on the end that is placed against the wall, but the other end is curved to fit the cabinet.
What is a cabinet filler?
A filler is a piece of finished wood used to “fill” openings or gaps between cabinets, or a cabinet and any obstruction, that would inhibit the doors or drawers from fully functioning. Typically, fillers are used to finish the space where an overall dimension of cabinetry is less than the overall wall dimension.
How do you fill the gap between cabinets and ceilings?
You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.
What are the different types of cabinet molding?
The three typical types of kitchen cabinet moldings that our clients consider are crown, light rail and toe-kick. They usually come in pieces 96″ long and in a large variety of designs, shapes and widths.
What is cabinet base molding?
Base Molding. Base Molding is generally used to provide a decorative trim at the floor level of base cabinets by installing it with the profiled edge facing up. It completes the lower sections of panel skins used on islands and peninsulas to give them a more furniture-like feel.
What is Batten moulding?
Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section similar to lath used in lattice, used to cover seams between panels of exterior siding or interior paneling.