What is a detent valve on a log splitter?
The detent valve in a log splitter is the central assembly where the unpressurized hydraulic fluid interacts with the pressurized hydraulic fluid, creating the necessary reactions that make the log splitter work in the first place.
How does a log splitter control valve work?
Most log splitters use a hydraulic cylinder (like these) to push a cut piece of log into a sharpened wedge, which splits it. The cylinder is driven by hydraulic oil, under pressure, produced by a hydraulic pump. The oil from the pump runs to a hydraulic valve, which provides control over the movement of the cylinder.
What are the parts of a log splitter?
Key Hydraulic Log Splitter Components Include:
- Hydraulic fluid tank and hoses.
- Hydraulic pump.
- Hydraulic cylinder or ram.
- Hydraulic control valve.
- Wood splitter head or blade.
- Motor or power source.
- Splitting Wedge.
What is detent valve?
DETENT: A spring device which maintains the spool of a directional control valve in position. FOUR-WAY: A 4 port valve (in, out and 2 work) used with double acting cylinders, bi-directional motors.
What is a float detent valve?
There’s two types of detents that you can have in a rear remote, and the first of those types will be a float detent, where you push the valve forward and you’ll feel a pop and it goes over top of a detent ball, and holds the valve in a forward position. The second way is a self cancelling detent.
How can I make my log splitter more powerful?
Most splitter systems run around 2200 to 2500 psi. The higher the pressure the more heat that you generate and the sooner things wear out. Use a guage and make sure the system is at normal operating temp when you set the pressure. A larger ram is the best way to get more splitting power.
What oil should I use in my wood splitter?
What oil do I need for my log splitter? AW22 or 32 Hydraulic oil is recommended for the log splitter. Automatic transmission fluid can be substituted and should only be used instead of hydraulic oil when temperatures are below 32 degrees F.
What is a valve detent?
DETENT: A spring device which maintains the spool of a directional control valve in position. DETENT RELEASE: A mechanical, hydraulic or electrical device for releasing the detent.