Is SRAM eagle any good?

Is SRAM eagle any good?

Our review In fact, back in 2018, we awarded the outgoing 12-speed 50t Eagle 4.5 out of 5 stars, impressed by its reasonable cost and shifting prowess. During 2020 — after Shimano announced its 12-speed offerings would have 51 teeth cassettes — SRAM upped its maximum Eagle gearing to 52t.

Is NX better than GX SRAM?

The NX groupset is a bit more of a budget-minded groupset, offering a crazy price-to-performance ratio. SRAM’s GX groupset is focused more on higher-end customers who are looking to pay more to save some weight on their bike, and they also offer a bit more performance than the budget-oriented NX groupset.

What driver does SRAM NX 11 speed use?

The NX cassette is paramount to the group’s affordability. It’s designed to run on a non-XD (Shimano style) driver body. This design restricts the minimum tooth count on the smallest cog to 11, whereas the XD driver body-style cassettes found on the GX and above groups offer a 10-tooth small cog.

Why is SRAM XX1 so expensive?

A giant spread of gears. This two-piece cassette is partly why the XX1 setup is so expensive. Once SRAM figure out how to construct this cassette using a cheaper method then expect to see big cassettes on A LOT of bikes. However, as some people point out, this compromises a top-gear for absolute pedal hammering speed.

Does SRAM GX have a clutch?

Leveraging the legendary history of SRAM shifting, the GX 2×10 rear derailleur provides incredible shifting speed and precision. EXACT ACTUATION™ technology eliminates slop and shifting variation. ROLLER BEARING CLUTCH™ technology delivers maximum drivetrain stability-even through the most punishing terrain.

How long does SRAM cassette last?

Cassette lifespan can range between 4000 to 10000 miles, and this is affected by the cassette itself and maintenance frequency.

Can you mix SRAM NX and GX?

NX and GX cassettes are not interchangeable without changing the hub. On some hubs, the hub driver can be changed but some can’t and would require replacing the entire hub. Otherwise, according to Sram, everything else (chains, shifters, derailleurs) are interchangable.

Is deore better than NX?

Speaking of cassettes, Deore wins when it comes to range, with a 10-51 tooth spread vs. the 11-50 tooth spread that NX uses. As far as weight goes, the complete NX group is lighter than Deore by 73 grams, a difference that’s mainly due to the cranks – NX cranks are lighter by 76 grams.

What is SRAM NX equivalent to in Shimano?

NX is roughly equivalent to SLX / Deore.

Does SRAM GX use XD driver?

If you decided you do have an XD Driver, your compatible Eagle Cassettes include GX, X01, And XX1 models. Alternatively, those of you who do not have an XD Driver, that will leave you with NX and SX options.

Is X01 worth it over GX?

Registered. Imo the XO1 is worth the cost over GX out of any other component in the drivetrain barring maybe the chain. One’s a single piece of machined steel billet the other is stamped/machined and pinned together.

How long does GX cassette last?

SRAM recommends changing the cassette at 2500 miles which equates to one year riding for me. I consulted with my local bike shop and they encouraged a change out the cassette at 3500 miles; I opted to wait until 5000 miles. I maintain the bike well so that contributed to the longer life.

Is the SRAM Rival 1×11 a good groupet?

However, the SRAM Rival 1×11 mechanical groupset represents some of the best value on the market. If you are looking at a new bike something with SRAM Rival 1×11 is often a marker of that first jump from best pricing to higher performance and it also makes a great option if you want to reinvigorate an older bike.

What is the price of a SRAM NX?

The impact of SRAM’s single-ring drivetrain is undeniable. The groupset is now available for all disciplines across a broad price range. At the low-end is SRAM’s NX single-ring, 11-speed system, which starts at $310 for a complete component group.

Why does SRAM NX 11 speed transmission have 11 teeth?

Because it mounts onto a standard splined freehub body rather than a dedicated XD driver, the smallest sprocket has 11 teeth, not 10. That’s a big difference in percentage terms (382 vs. 420 percent), but we rarely use the 10t cog on other set-ups so it’s less of an issue on the trail.

What kind of cassette does SRAM NX use?

The NX cassette is paramount to the group’s affordability. It’s designed to run on a non-XD (Shimano style) driver body. This design restricts the minimum tooth count on the smallest cog to 11, whereas the XD driver body-style cassettes found on the GX and above groups offer a 10-tooth small cog.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top