What size SIM card does the LG G2 use?

What size SIM card does the LG G2 use?

Micro size SIM
This device supports a Micro size SIM card.

How do you put a SIM card in a LG phone?

Turn the power off and remove the back cover and the battery (as demonstrated in the previous instructions). Locate the SIM card slot (a SIM card graphic is inscribed on the left side of the slot). Position the SIM card with the Verizon logo facing up and slide it into place until it is fully inserted in the slot.

What if SIM card slot is not working?

SIM slot and connector sometimes accumulate dust over them, causing the device not to read the card properly. So you should look into this as well. Wipe the connector gently to remove the dirt. A broken pin may also cause a problem of no sim card detected on an android phone.

Where is the SIM card on LG phone?

The SIM card is installed in the LG phone’s battery compartment, so you must remove the battery before removing the SIM card.

1. Press and hold the “Power” button to shut off your LG phone.
2. Remove the phone’s back cover.
3. Lift up on the bottom of the battery to remove it.
4. Slide the SIM card away from the slot to remove it.

Which side of the SIM card faces up?

3. When inserting the SIM Card, make sure the notch on the SIM card is oriented so the upper right is inserted first with the gold contacts face up..

How do I set up my old SIM card in my new phone?

You can often switch your SIM card to a different phone, provided the phone is unlocked (meaning, it is not tied to a particular carrier or device) and the new phone will accept the SIM card. All you need to do is remove the SIM from the phone it is in currently, then place it into the new unlocked phone.

Why is my SIM card slot not reading my SIM card?

Loose SIM card slot will caused the card losing the connection with the reader of the device. Solution: You can try to apply some pressure to the slot check again if the slot hold the SIM properly. 3. Dust over the slot and SIM card reader making the slot incapable of reading the card properly.

How do I activate my SIM card slot?

To install the SIM card:

1. Turn your computer over. NOTE: The SIM card slot location varies by computer model.
2. Remove the battery.
3. Insert the SIM card into the slot available in the battery bay. (see note above that you ensure exactly where your SIM card slot is located.
4. Replace the battery.