How do I reset my Sony soundbar SA ct60bt?

How do I reset my Sony soundbar SA ct60bt?

In order (and within 3 seconds) press the “Bass + ” then “Vol – ” then “Trebble + ” on the remote control. This will reset the soundbar.

How do I control my Sony sound bar with my iPhone?

iOS™ devices:

1. Tap on the Music Center icon to launch Music Center.
2. Tap the + (Add Device) button, and follow the instructions on the screen.
3. Set your audio device to bluetooth pairing mode.
4. From the setting screen of the iOS device, select Bluetooth and select the audio device.

How do I reset my Sony sound bar?

How to reset the Soundbar

1. Press and hold the + (volume up) button, (power) button, and (input select) button on the unit for more than 5 seconds to reset the system.
2. Unplug the AC power cord.
3. Plug the AC power cord back in again, and press the (power) button to turn on the unit.

How do I connect my Sony soundbar to my Mac?

Press and hold the (power) button/ PAIRING button until you hear the voice guidance and the (BLUETOOTH) indicator begins to flash quickly in blue. The speaker enters pairing mode. Search for the speaker on the computer. Select [ (System Preferences)] – [Bluetooth] in the taskbar on the right-bottom of the screen.

Where is the reset button on my soundbar?

For a factory reset, you need to locate the “Off” button on the control panel. Turn off your soundbar before you hold down the “Off” button for however long it takes for the soundbar to display “INIT OK”. After you see it on your soundbar, you can turn your device back on and try to pair it again with your TV.

Why has my Sony soundbar stopped working?

While your TV and audio device (Sound Bar, Home Theater System, or Home Audio System) are off, verify that the cables between the TV and Audio device are securely connected. NOTE: Disconnect the HDMI cables, then reconnect them again. Make sure that your TV has an ARC or eARC/ARC label on the HDMI jack.

How do I turn on the sound bar on my iPhone?

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Is there an app for Sony soundbars?

You can also download the free SongPal app to control the soundbar from compatible Android and iOS devices.

Why is my Sony sound bar not working?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to TV input. Change the TV audio output setting to PCM and check whether sound is output.

Why did my sound bar stopped working?

If you’ve connected your television set to the soundbar using a cable but there’s no audio, the most likely cause of the problem is an improper cable connection or a malfunctioning cable. If the speaker is turned on and there’s no audio, first check the connection. You can unplug and plug in the cable firmly.

How do I put my Sony Soundbar in pairing mode?

On your soundbar, press and hold the BLUETOOTH button for two seconds.

1. Your soundbar enters the pairing mode.
2. The Bluetooth indicator flashes quickly.

How do I reset my Sony sound bar Bluetooth?

If the issue still occurs, follow these steps to reset your soundbar:

1. Press and hold the (power), (input select), and + (volume) buttons at the same time for more than five seconds.
2. Unplug the power cord and plug it back in to a working outlet.
3. Turn on your soundbar.