What is a C19 plug?
EC60320 C13 and C19 cables are commonly used on electronic equipment such as computers, monitors, and servers to ensure international compatibility across different countries’ standards. Most standard PCs have a C14 male inlet and in the US use a C13 (female) to standard 5-15 plug cord-set.
What is IEC C19?
The IEC Power Cable with C19 connector is commonly used in computer servers, rack-mount power distribution units and UPS power connections. The C19 is an outlet or socket whereas the C20 is a plug of the same mating pair format. Features. 10 Amp Power Lead. Compliant with AS/NZS3112.
What is a C14 plug?
IEC C14 to C13 cords are the most popular type of power cord used to power equipment in a data center server rack. Sometimes referred to as Jumper Cords, C14 to C13 cords are used to connect server and network equipment power supplies to a PDU or power strip.
What color are old wires?
Old plug wiring consists of a red live wire, black neutral wire and a green/yellow or a pure green PE wire.
Does C20 plug into C19?
The C19 plug is usually found on power cables, e.g. for servers, with a mains plug at one end and a C19 connector at the other end….IEC-320 C19 (female)
| International IEC standard | 230V 50Hz Max current 16A |
|---|---|
| North America | 120V 60Hz allows C19/C20 for up to 20 A (IEC maximum is 16 A) |
What is a C20 outlet?
IEC C20 plug adapters allow you to adapt any of the mating plug styles to the connectors below into an IEC C19 outlet. For example, the C20 to L6-30R plug adapter would allow you to convert a male L6-30P plug to a C20 so that it can be plugged into a C19 outlet on a power strip. Manufacturer.
What is a C20 connector?
C20 Power Cord Plug Adapters IEC C20 plug adapters allow you to adapt any of the mating plug styles to the connectors below into an IEC C19 outlet. For example, the C20 to L6-30R plug adapter would allow you to convert a male L6-30P plug to a C20 so that it can be plugged into a C19 outlet on a power strip.
Which is the mating connector for the C13 socket?
The mating connector for the C13 socket is the C14 plug, which is often mounted into a recessed panel or chassis on computer power supplies or power transformers. Shop IEC 320 C13/C14 IEC 320 C5
What are the IEC C13 and C14 connectors based on?
The IEC C13/C14 connectors are based on standards created by the neutral wire of an AC circuit (which is normally shorted to ground in a 2-wire outlet). Dec 2, Source: Electronics | Pin-outs | IEC Connectors. If you wire it, the colours depend on where you live.
Which is the IEC standard for power connectors?
The IEC 320 C13/C14 connectors are based on standards created by the International Electrotechnical Commission, an international standards body. The “320” refers to the number of the specification that describes power connectors. The official text of the standard is actually numbered 60320, but common vernacular usage shortens it to 320.
Where do you find the IEC 60320 C8 inlet?
The IEC 60320 C8 Inlet is commonly found on standard power supplies for electronic devices that are double insulated, due to the fact there is no grounding conductor. These connect to the C7 connector, which is commonly referred to as the figure 8 or infinity connector.