How do I connect my BT wifi extender 500?

How do I connect my BT wifi extender 500?

Press the Link button on the Broadband Extender for five to eight seconds. Wait for the Power light to go back to steady green. Press the Link button again, this time for one second. Within two minutes, press the Link button on one of the other Broadband Extenders in your home for one second to complete the connection.

How do I connect my BT extender?

1 Plug in the extender halfway between your hub/router and the area you wish to extend wi-fi to. 2 Give the extender 20 seconds to boot up, then the range lights will scroll back and forth while it searches and connects to your router. After about 30 seconds, the flashing will stop and the signal quality will be shown.

How do I reset my Flex 500 extender?

If your broadband extenders stop working or become unpaired, you can reset both extenders to their factory settings: 1 Make sure the broadband extender is plugged in and the power socket’s switched on. 2 Press the Link button for more than 15 seconds until the Data and Power lights go out.

How do I reset my BT Powerline 500?

1 Make sure the powerline or wi-fi powerline is plugged in and the power socket’s switched on. 2 Press the Link button (on the bottom of powerline) for more than 15 seconds or the WPS/Link button on the front of the wi-fi powerline for 20 seconds to restore factory default settings.

How do I connect my WiFi extender to a new router?

Plug your Range Extender into a power outlet near your main Router/AP. 2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. Note1: After you have pushed WPS button of your Router/AP, you need to push WPS button of your Range Extender within 2 minutes.

How do I connect my WiFi extender to my router without WPS?

If your router doesn’t support WPS, go to ‘Method 2 – Without WPS button’ opposite. 1 Plug the extender into a power socket near your broadband wireless router (e.g. in the same room). Check the extender On/Off button on the top is switched on. Wait 20 seconds for the extender to boot up.

How does the BT TV extender 500 work?

The BT Broadband Extender 500 Flex Kit allows you to connect your BT TV box to your BT Hub without having to run an Ethernet cable all the way around the home. It does this by sending your broadband signal through the electrical wiring in your home. Each extender also has a power socket on the front, so you don’t lose a plug socket on your wall.

Can a broadband extender 500 kit be replaced?

Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion, the option to replace the Broadband Extender 500 Kit or any component thereof which is identified as faulty or below standard, or as a result of inferior workmanship or materials.

How long is the BT Broadband extender guarantee?

For information on safety instructions, technical information or setting up the extender, please see the Frequently Asked Questions at bt.com/producthelp. Guarantee. Your Broadband Extender 500 Kit is guaranteed for a period of 3 years from the date of purchase.

How to reset broadband extender to factory settings?

Reset to factory settings. If your broadband extenders stop working or become unpaired, you can reset both extenders to their factory settings: 1 Make sure the broadband extender is plugged in and the power socket’s switched on. 2 Press the Link button for more than 15 seconds until the Data and Power lights go out.