Why is the red light blinking on my HP LaserJet P1102w?

Why is the red light blinking on my HP LaserJet P1102w?

The Attention light blinks. The Attention light blinks when the printer is in an error state due to missing toner cartridge, the top cover is not properly closed, or the paper is not loaded correctly or is jammed.

What does the flashing triangle mean on HP printer?

That error indicates that the print-cartridge door is open or other errors exist. Check for a paper jam.

How do I reset my HP LaserJet P1102w?

Turn the printer off:- Press and hold down the wireless button and the cancel button (x button) while turning the printer back on and don’t release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.

How do I troubleshoot my HP LaserJet P1102w?

FIX: HP LaserJet p1102w not printing via USB

1. Check Device Manager warning.
2. Perform a clean install.
3. Reset the printing system.
4. Troubleshoot the USB cable and connection.
5. Set the USB connection as default printer.
6. Use HP Print and Scan Doctor.
7. Disable Startup services, and reinstall HP software.

How do I fix the orange light on my HP printer?

Light bar blinks amber fast

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait for 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. Wait for the printer to fully turn on.

How do I fix a 52 scanner error?

The product has experienced a scanner error. Turn off the power by using the power switch, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket.

How do I fix the yellow triangle on my printer?

It usually means the drivers for that printer are corrupted or missing. I would uninstall and download and install the printer again.

What does a yellow triangle with an exclamation mark mean on a printer?

Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver.

How do I install HP LaserJet P1102w USB?

Connect a USB cable to the USB port on the rear of the printer , and then to the computer. Make sure the printer firmware is up-to-date. Go to Software and Driver Downloads, type your printer name, and then press Enter. Install any available firmware updates.

How do I get my HP LaserJet P1102w back online?

Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the printer.

Why is my HP printer printing so slow?

Network issues can cause slow printing as well. If your printer is on network and there is a mismatch of 10/100 Mbps speed or Half/Full duplex, the printing can be slow. If your OS is Windows, remove the printer from Printers and Faxes.

What is hp wireless printing?

An HP printer or MFP that has the HP ePrint Wireless Direct Printing feature behaves as a wireless access point where the mobile device connects as though it were on any wireless network. Once the device is connected, the user can print from any app that has printing options.

What is HP LaserJet printer?

LaserJet is a printer by Hewlett Packard (HP) designed for high print quality, horizontal and vertical printing, printing graphics, text, letters, memos and spreadsheets. It is considered to be the first desktop laser printer.

What is HP printer email?

HP ePrint via Email is a feature of most HP printers and MFPs that enables printing documents attached to email messages sent to the device. The HP ePrint-capable printer or MFP must be registered to an HP ePrint cloud service called HP ePrint Center, which assigns a unique email address to the printer or MFP.