Is RAM speed the same as CPU speed?
Faster RAM is better, but not vital To stress the point, it’s always better to have faster components – if you can afford it. But RAM speed is less important for most people than CPU, GPU, and storage performance, and again, it’s better to have more RAM than faster RAM.
Should FSB match RAM?
The FSB does not have to be higher than the RAM speed, though generally the way it works out, if the DDR2 rate on paired DIMMs is half that of the (quad-pumped) FSB, the bandwidth is matched. quote: My mb is a via chipset, pt880, it supports 533-1066 processors.
Does RAM matter faster than CPU?
It makes no difference. If the RAM run as a faster frequency then supported by the CPU it will be ran at the frequency that is supported. The simple fact is your unlikely to see a difference unless you double or triple the difference of difference memory.
Is CPU speed or RAM more important?
RAM is essentially the core of any computer or smartphone and in most cases, more is always better. RAM is as significant at the processor. A right amount of RAM on your smartphone or computer optimizes performance and the ability to support various types of software.
Is 3200mhz RAM good for gaming?
The best RAM for gaming is the kit that unlocks your CPU’s stellar performance, and that means squeezing the best frame rates out of your gaming PC. For the vast majority of gamers, the best RAM kit would be a 16GB or 32GB set at 3,200MHz for Intel processors, or 3,600MHz for AMD’s latest CPUs.
What is FSB processor speed?
The FSB speed of a CPU, which translates into the “front side bus” speed of a “central processing unit,” is the speed at which data is processed in a computer. Most motherboards nowadays have FSB speeds around 1,066 Mhz or 1,333 Mhz.
Is front side bus speed important?
This bus and the cache connected to it are faster than accessing the system memory (or RAM) via the front-side bus. The speed of the front side bus is often used as an important measure of the performance of a computer.
Can I use 3200mhz RAM in 2400mhz motherboard?
Yes. Throw the memory in and try the XMP profile…it may even run faster than 2666.
Can I use 3200mhz RAM in 2933mhz?
The 2933 MHz is the native speed that the CPU officially supports. Nothing stands against being able to use faster sticks with no drawbacks. For faster speeds you just need a motherboard that can support the desired speed. In your case your motherboard and support 3200 MHz if it’s overclocked just a bit.
Will upgrading RAM improve CPU?
In a nutshell, installing more RAM may improve computer speed if you frequently use many programs or browsing tabs at once, or if you do memory-intensive tasks like gaming or Photoshop. Under regular use, however, a CPU upgrade will probably have a greater immediate effect on performance.
Which is faster the FSB or the CPU?
FSB should equal to CPU clock, but nowadays we read/hear about 400MHz/533 FSB those are actually the efficiency by dual channels and double data rate. For example, the FSB is 133 (MHz) x2 (dual channels) x (double data rate) = 533 MHz (virtual working efficiency). Memory speed also measured in memory clock.
Is there a ratio between FSB and Ram?
This is not always the case and you can have an unbalanced FSB and memory bus with a ratio such as 2:3 (FSB:RAM). A DDR memory module transfers data at 64-bits at a time which equates to 8-bytes at a time. Therefore we can work out the speed of the memory. DDR-200 runs at 200MHz which works out at 200 x (64/8) = 1600MB/s (megabytes per second).
Is it possible to increase the FSB on a motherboard?
It is possible to increase the FSB speed on some motherboards to allow you to overclock the CPU so that you can speed the computer up but the memory bus will need to operate at the same speed as the FSB to keep the system balanced and you may need faster memory modules. There are more details on this on the Overclocking page.
Is there limit to FSB and memory speed?
In their case, the memory controller is integrated on to the processor itself, so there is no FSB that limits the bandwidth used — the limit is the speed of memory that the processor itself supports. Currently this is DDR2-800 for current “K8” generation Athlons.