How do I setup my Dlink DIR 300?

How do I setup my Dlink DIR 300?

How to setup WPA-PSK / WPA2-PSK for DIR-300

1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
2. Step 2 Launch your IE (Internet explorer) and key in 192.168.
3. Step 3 Enter your Username: admin and no password (if it is default) click on OK.

How do I enable Internet on my Dlink router?

Setting up a D-Link Router

1. Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router.
2. Enter the D-Link router password.
3. Setup a strong password.
4. Select your Timezone.
5. Configure your internet connection.

Why is my D-Link router not connecting to the Internet?

Ensure your Internet modem is connected to the WAN/Internet Port on the back of the D-Link Router. This port is typically Yellow. – Power Off your Internet Modem (Not the D-Link Router) for 20 seconds and then power it back on. Wait up to 2 minutes and check the Network Status again.

How do I connect my D-link to my WIFI?

Step 1: Launch the D-Link Wi-Fi app.

1. Step 2: Tap the 3 horizontal lines in the upper left corner and tap Install Your Device.
2. Step 3: Scroll through the list and tap DIR-867.
3. Step 4: Follow the installation steps to connect the router to your modem and power on.

How do I change my WIFI security settings Dlink?

How to Make My D-Link Wireless Router Secure

1. Open your Web browser.
2. Type “admin” (without quotes) into the “User Name” to log in with the default login.
3. Click the “Wireless Settings” tab.
4. Click the drop-down arrow of the field next to “Security Mode.”
5. Select the security mode you want to apply to the router.

How do I change my D-Link DIR 300 WIFI password?

How do I change my D-Link Router’s password?

1. Step 1: Open your Internet browser and enter.
2. Step 2: Enter the password for your Admin account in the field provided.
3. Step 3: Locate the Wireless Settings from the drop down menus.
4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

What is setup DSL?

A digital subscriber line (DSL) modem is a device used to connect a computer or router to a telephone line which provides the digital subscriber line service for connection to the Internet, which is often called DSL broadband.

Is D-Link WiFi down?

Dlink.com is UP and reachable by us.

How do I fix my Dlink router problem?

How to Troubleshoot D-Link Wireless Router Quickly?

1. Remove the D-Link router from the current position.
2. Unplug any Bluetooth device or 2.4Hz cordless phone.
3. Unfold a paper clip and push it into the rest hole of the D-link Router and hold it for 10 seconds.
4. Open any web browser and enter 192.168.

Is the D-Link G dir-300 a wireless router?

The D-Link Wireless G DIR-300 Router which is capable of transferring data with a maximum wireless signal rate of up to bps* in the . GHz frequency — the same wireless frequency as 80.11b. The D-Link DIR-300 Wireless Router also offers four Ethernet ports to support multiple computers.

What can you do with a wireless N 300 router?

Upgrading your home network to Wireless N 300 provides an excellent solution for sharing an Internet connection and files such as video, music, photos, and documents. Not only does the D-Link Wireless N 300 technology extend your wireless range, it’s also backwards compatible with previous-generation wireless devices.

How do I set up my internet connection?

There are two ways to set up your Internet connection: you can use the Web-based Internet Connection Setup Wizard, or you can manually configure the connection. Note: Only Administrator has access to some of these functionalities.