How do I factory reset my firebox?

How do I factory reset my firebox?

To reset a Firebox T Series device to factory-default settings:

1. Power off the Firebox.
2. Press and hold the Reset button on the back of the Firebox.
3. While you continue to hold the Reset button, power on the Firebox.
4. Continue to press the Reset button until the Attn indicator begins to flash.
5. Release the Reset button.

How do I reset my WatchGuard Firebox password?

Change Your WatchGuard User Account Password

1. Go to www.watchguard.com and log in to the WatchGuard Portal with your user account credentials.
2. In Support Center, select My WatchGuard > Manage Profile.
3. In the About You section, click Change Password.
4. In the Your Current Password text box, type your current password.

How do I reset my fireguard edge to factory-default?

To reset the device to factory-default settings:

1. Disconnect the power supply.
2. Press and hold the Reset button on the back of the device.
3. While you continue to hold down the Reset button, connect the power supply.
4. Continue to hold down the Reset button until the yellow Attn indicator stays lit.
5. Release the Reset button.

What is the default password for WatchGuard Firebox?

Password — Firebox serial number, including the dash. The Wi-Fi password is case-sensitive.

How do I factory reset my WatchGuard m570?

When the Power button is green, press and hold the power button for five seconds to power off the device. The Firebox does not power off if you briefly press the power button. The Reset button, located to the right of the power button, resets the device to factory-default settings.

How do I access WatchGuard cloud?

To enable WatchGuard Cloud, from Fireware Web UI:

1. Open the device configuration in Fireware Web UI.
2. Select System > WatchGuard Cloud.
3. Select the Enable WatchGuard Cloud check box. If your Firebox requires a Verification Code to register with WatchGuard Cloud, the Verification Code text box appears.

How do I factory reset my watchguard m570?

How do I reset my watchguard M200?

To reset a Firebox M200 or M300 to factory-default settings:

1. Power on the Firebox.
2. Wait until the Arm indicator (
3. Press and hold the Reset button on the front of the device.
4. Continue to hold the Reset button while the Arm indicator is red or is not lit.

How do I change my passphrase on WatchGuard?

After you have set up WatchGuard Server Center, you can change the Administrator passphrase at any time….The User and Group Properties dialog box appears.

1. Select the Change passphrase check box.
2. Type and confirm the new passphrase.
3. Click OK.

How do I enable SSH on WatchGuard?

To add an SSH host to the Access Portal, from Fireware Web UI:

1. Click Add and select Host Shell Access (SSH).
2. In the Name text box, type a name for the SSH connection.
3. In the Description text box, type a description of the SSH connection.
4. To select a custom icon for the application, select Custom Icon > Choose File.

How do I log into my WatchGuard firewall?

The URL to connect to the Web UI in your browser is:

1. https://:8080.
2. is the IP address assigned to the trusted or optional interface on your device. When you make this connection, the browser loads the login page. The default URL for a WatchGuard Firebox is:
3. https://10.0.1.1:8080.

Is there a way to reset firebox to default settings?

The factory-default Firebox configuration enables the trusted and external interfaces with default settings, and includes the admin and status accounts with default passphrases. You can reset a Firebox to factory-default settings if you lose the passphrases or just want to start over with a new configuration.

How to reset firebox XTM 25 to factory settings?

To reset an XTM 25 or XTM 26 to factory-default settings: Disconnect the power supply. Press and hold the Reset button on the back of the device. While you continue to hold the Reset button, reconnect the power supply or power on the device.

How do I Reset my firebox WatchGuard to factory settings?

Briefly press the Power button on the front of the device to power it on. The Firebox restarts with factory-default settings. Power off the XTM device. Press and hold the down arrow button on the device front panel while you power on the device. Continue to press the down arrow button until the message Safe Mode starting appears on the LCD display.

What happens to my firebox when I restart my computer?

When the Firebox restarts, if Interface 0 is connected to a network and can get a DHCP address, the Firebox automatically attempts to download the latest feature key from WatchGuard. For a complete description of the factory-default settings, see About Factory-Default Settings.