How do I setup my Belkin F5D7230-4?

How do I setup my Belkin F5D7230-4?

For the Belkin F5D7230-4, you have to do the following steps for access:

1. Put router into operation.
2. Establish a connection between the device and the router via network cable or Wi-Fi*
3. Open web browser.
4. Enter IP address in the address bar and then confirm with ‘Enter’ key.

How do I connect my Belkin wireless G router?

How to Set Up the Belkin Wireless G Router

1. Unplug your cable or DSL broadband modem and the Belkin router.
2. Insert one end of the Ethernet cable into the “Internet” port on the rear of your broadband modem.
3. Plug in the power adapter for the broadband modem and the Belkin router.

How do I enable DMZ on my Belkin router?

To enable DMZ on your router, follow the steps below:

1. Access your router’s web interface. For instructions, click here.
2. Click on Configuration.
3. Click Security.
4. Click DMZ.
5. Check the DMZ box.
6. Set the Source IP Address and Destination.
7. Click Save to apply settings.

What is Belkin 54g?

The Belkin Wireless G Router lets users share files and a broadband Internet connection among their computers-without using networking cables. The Router uses the wireless 802.11g 2.4GHz standard to offer you 400 feet of wireless coverage.

Which Belkin routers support wireless bridging?

Wireless bridging works with the following models only:

• Belkin High-Speed Mode Wireless G Router, F5D7231-4.
• Belkin Wireless G Router, F5D7230-4.
• Belkin 54g Wireless Network Access Point, F5D7130.
• Belkin Wireless G Wireless Universal Range Extender, F5D7132.

How do I make my Belkin router an access point?

How to change a Belkin router to AP mode

1. Connect a computer to the Belkin router and launch a web browser.
2. Visit the following router configuration page: 192.168.2.1.
3. You are prompted to enter a username and password.
4. Go to Wireless > Use as Access Point.
5. Click Enable and Apply Changes.

How do I install my Belkin router without the CD?

Setting up the Belkin router without using the Setup CD

1. Connect your computer to the modem using an ethernet cable without the router installed.
2. Verify if your computer is getting an internet connection by accessing a website.
3. Connect your modem to the WAN or Internet (modem)

How do I connect my Belkin wireless router to my modem?

Connect the modem to your Belkin router using an Ethernet cable. The Ethernet cable must be plugged into an open Ethernet port on your modem, and into the port on your Belkin router labeled “WAN / Internet.” Reconnect your Internet modem to its power supply. Plug in the Belkin router to its power supply.

What is a Belkin router used for?

Setting up your Belkin router allows all the computers and devices in your home to share the same high-speed Internet connection so you can browse the Web, play games, check email, and more.

What is a Belkin G Wireless Router?

The Belkin Wireless G Router lets users share files and a broadband Internet connection among their computers-without using networking cables. 802.11g technology is the easiest wireless network to implement. The Router uses the wireless 802.11g 2.4GHz standard to offer you 400 feet of wireless coverage.

Can I use my Belkin router as a repeater?

Most Belkin Wi-Fi routers are capable of becoming wireless repeaters using a special mode called the Wireless Distribution System. You can turn a Belkin Wi-Fi router into a repeater by setting up WDS. Connect an Ethernet cable from a computer to one of the “LAN” ports on the Belkin router.