What oil goes in an Ingersoll Rand compressor?
XL-300 compressor oil is a non synthetic oil that is used in small reciprocating compressors (both one and two stages units). This oil is free from chemical treatments and all additives, and is what Ingersoll Rand recommends when using their small recip compressors.
What kind of oil should I use in my air compressor?
You may use a synthetic or mineral oil in your air compressor and have it operate perfectly. You should avoid oils with a detergent additive, these are common in motor oils. So specify a non-detergent oil. In terms of viscosity, you’ll want an SAE 30 or SAE 20 air compressor oil.
How much oil does an Ingersoll Rand compressor take?
Ingersoll Rand 2-Stage Splash Lubricated Air Compressor Pump with 28 oz. Oil Capacity – 2340
| Item | Air Compressor Pump |
|---|---|
| HP | 5 |
| Free Air CFM @ Max. Pressure | 14 |
| Max. Pressure | 175 psi |
| Oil Capacity | 28 oz. |
What kind of oil do you use in a 2 stage air compressor?
The Clear Choice for Lubricated Compressors In general, manufacturers today recommend using either a 20 or 30 weight synthetic lubricant — rather than a mineral oil — to get the best results out of your industrial compressed air system.
Can I use ATF in my air compressor?
ATF Oil. Automatic Transmission Fluid oil is another one that we see being used in compressors. While most ATF fluids have some detergents in them, they are designed to go long distances without being changed. This makes them better suited for use in compressors.
What is the difference between air compressor oil and motor oil?
What Is Air Compressor Oil? The difference between engine oil and air compressor oil is that compressor oil has no detergents. While detergents can help clean an engine, those same detergents can cause the oil to carry metal shards into the cylinder wall of your air compressor.
What can I use instead of compressor oil?
Substitutes for Air Compressor Oils
- Hydraulic oil: Hydraulic oil possesses multiple qualities that make it an acceptable substitute for air compressor oils.
- Automatic transmission fluid: Automatic transmission fluid (ATF) is primarily used in car transmissions, but some kinds can also be used in air compressors.
Is WD40 good for air tools?
It’s also crucial to note that pneumatic nailers and staplers require special lubricant, specifically labeled as pneumatic tool oil. Never use WD40, motor oil, transmission fluid or aerosol lubricants.