How do I reset my hunter thermostat?

How do I reset my hunter thermostat?

Press and hold the Programs button, and at the same time press in the recessed Reset button with the tip of a ballpoint pen. Release the Reset button and continue holding the Programs button until the Reset Memory screen appears (then release the Programs button).

How do I reset my hunter 44110 thermostat?

Use a paper clip to press the reset key. Once all the LCD segments turn on, release the Up key. other keys during the reset process. All programs and settings will be lost when pressing RESET.

How do you change the battery in a hunter thermostat?

How do I Replace a Hunter Douglas Thermostat Battery?

1. Lift the front cover of the thermostat upward.
2. Push the battery release latch inward and upward to remove the battery housing unit cover.
3. Insert two AA 1.5-volt batteries.
4. Slide the battery housing unit cover over the batteries and back into position.

How do I reset my vivint thermostat?

Factory Reset

1. From the Home screen, press and hold the SIDE button for three (3) seconds.
2. Press DOWN to highlight Installer, then press the SIDE button.
3. Press DOWN to highlight Reset, then press the SIDE button.
4. Press DOWN to highlight Reset, then press the SIDE button.

Why is my hunter thermostat not working?

If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.

How do I program my Indiglo thermostat?

Indiglo Programmable Thermostat Instructions

1. Step 1: Set the Day and Time. If the thermostat is displaying the wrong day, press the MENU button repeatedly until the setting you wish to change begins to flash.
2. Step 2: Set the Day Programs. Press the SCHEDULE button to enter scheduling mode.

What does a flashing 3 mean on a Hunter thermostat?

A flashing 3 means the third setting is currently operating the heater or AC.

How do I reset my thermostat after changing the battery?

Factory Reset the Thermostat

1. Ensure that your thermostat is turned off.
2. Open the door of the battery compartment.
3. Now take out the batteries.
4. Put the batteries back on in reverse to the indicated polarity by the markings in the battery holder.
5. Allow the batteries to stay this way for about five seconds.