How do I setup my Plantronics headset CS55?

How do I setup my Plantronics headset CS55?

Press both the talk button (14) and the mute control button (15) on the headset for 5 seconds.

1. When the talk indicator light (17) on the headset blinks, release both buttons. Press the talk button again.
2. from the AC power adapter jack (7) for 5 seconds, then reconnect.
3. The system reset operation is complete.

How do I connect my Plantronics CS55 headset to my computer?

Press straight down and hold on the mute button on your CS50 or CS55 wireless headset until a solid green LED light appears, then release. Red light will go solid and green light will go out, your headset is now paired.

How do I reset my Plantronics CS55?

To reset your CS50/CS55/CS60:

1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly.
2. Press and hold the talk button (B) again.
3. Disconnect the AC power supply from the bottom of the base.
4. Test the headset to ensure it works properly.

How do I pair my CS55?

Press and hold both the + and – buttons on the back of the charging base until the red light on the front of the base starts to flash. Let go of both buttons. The red light should continue to flash. Push in the mute button (see below) until a green light appears on the headset, then release the button.

Can Plantronics CS50 connect to computer?

Plantronics PerSono Suite software provides the link between your CS50-USB headset and compatible softphone applications on your computer.

How do I reprogram my Plantronics headset?

Reset Plantronics Bluetooth Headset

1. Remove the Plantronics headset from your cell phones paired devices.
2. Power your cell phone off, then power it back on.
3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
4. Your Plantronics headset should now be reset.

Why is my Plantronics headset not working?

If you are experiencing issues using your USB headset, try the following: Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports.

How do I resync my Plantronics headset?

Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.

How do I pair my Plantronics wireless headset with base?

To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.

How do I connect my Plantronics headset to my landline?

Connecting the Plantronics CS510/CS520 Headset to a Desk Phone

1. Disconnect the handset cord from the desk phone and insert it into the port on the telephone interface cable.
2. Connect the end of the telephone interface cable (below) to the back of the headset base unit.