What kind of distributor is a Mallory Unilite?
Features:
| Brand | Mallory |
|---|---|
| Distributor Type | Electronic, Unilite |
| Emission Code | 4 |
| Engine | Chevy Small and Big Block |
| Product Type | Distributor |
Is Mallory still in business?
In a not-surprising move, the folks at MSD Performance today announced plans to merge the Mallory Ignition brand with the MSD Performance brand by the end of the first quarter of 2015. Moving forward, all fuel and ignition system products manufactured by the company will be sold under the MSD Performance brand.
Who owns Mallory distributor?
Mallory Ignition is one of the five premier brands of the Prestolite Performance Group. All brands insure quality, reliability and value for all of your performance and custom needs.
How do you adjust the mechanical advance on Mallory distributor?
To adjust the advance limit on these assemblies, DO NOT BEND ADVANCE TAB. Rather, loosen the two screws and rotate the advance plate to adjust limit. Re-tighten the screws after adjustment. The amount of advance can be adjust- ed from 0° to 28°.
Where are Mallory coils made?
He gave me a little history lesson: In March of this year, Mallory was bought out by an investment group and all the parts are now made in Mexico, not the USA as previously done.
Does a Mallory Unilite distributor need a ballast resistor?
Use Mallory’s coil for electronic ignition. You DO need an external ballast resistor, be it a ceramic edition or the proper resistor wire. If you do NOT use that, you will harm the internals of the distributor.
Where are Mallory capacitors made?
Washington Street in Indianapolis, Indiana, and had several divisions besides Duracell batteries including Mallory Capacitor Company with manufacturing plants in Greencastle, Indiana; Huntsville, Alabama; Waynesboro, Tennessee; and Glasgow, Kentucky.
Who makes Mallory Capacitors?
The North America Capacitor Company (NACC) is headquartered in Indianapolis, Indiana. Today, NACC continues to manufacture and market Mallory capacitors at its modern manufacturing and warehouse facilities located in Greencastle, Indiana and Glasgow, Kentucky.
What was the Mallory Unilite used for in the 70’s?
A staple back in the 70’s, the tried and true Mallory Unilite was the original performance distributor. Its small compact housing along with the elimination of old fashioned points made it popular among performance enthusiasts when it came to engine performance.
What kind of distributor shaft does Mallory use?
Strong .500”, QPQ coated distributor shaft guided by a ball bearing for long life and great performance Since 1925, Mallory has been a leading manufacturer of automotive ignition products.
How do you connect a Unilite distributor wire?
The 3 wires coming from the UNILITE® Distributor must be connected using the distributor wire harness provided. (see Figures 1 and 2).RED WIRE: If you use loom resistance wire, connect to the coil (+) terminal. If you use a ballast resistor, connect to 12 volt side of ballast resistor. GREEN WIRE: Connect to the coil (–) terminal.
How does Mallory Racing Services support its products?
Mallory provided trackside technical support for its products from its 53-foot racing services trailer. This support vehicle and the involvement of our technicians have helped to keep Mallory, Inc. abreast of all the changes and developments in the industry. Customer service and innovation have always driven Mallory to success.