How much does an ETA 2824-2 cost?
A single ETA 2824-2 movement will set a watchmaker back around £225 (about $290), assuming they buy just one. And that same movement will pop up anywhere from “budget” watches to some serious, top-end timepieces with posh names on the dial—and prices to match.
Is the ETA 2824-2 A good movement?
We also featured some of these watches in our recent guide “One-Watch Collection: The Best Everyday Watches 2018.” The ETA 2824 (technically, “2824-2”, but we’ll use the shorthand) is a great movement that powers many affordable everyday watches.
How long will an ETA 2824 last?
It would probably run fine 15 years, but with much more wear and tear. The oil dries both in 7s26 and 2824 at the same rate. It’s not much 28800 bph vs 21600 bph, rather dry vs oiled: as long as the movement is correctly lubricated it will work well (and last longer).
Can you hand wind ETA 2824-2?
IT IS OK TO WIND YOUR ETA MOVEMENT. Any watches posted may be seen as gifts,borrowed or found property and not as personal property of Little Big Feather.
How accurate is ETA 2824?
+/-12 seconds per day
The accuracy rating of the ETA 2824-2 is +/-12 seconds per day up to +/- 30 seconds per day. Due to its Swiss-made pedigree, the ETA 2824-2 movement is more expensive than comparable movements made in other countries.
How much does it cost to service an ETA 2824?
As a former jeweler, I would see estimates for the ETA 2824/2834-2, from local watchmakers, at around $120-$180 for a standard service, ie: cleaning, oil & regulation. Parts replacement may be additional.
How many jewels are in ETA 2824 movement?
twenty-five jewel
One workhorse of the ETA mechanical line is the ETA 2824-2, The 2824 is an automatic winding, twenty-five jewel movement, available in four executions or grades: Standard, Elaborated (improved), Top and Chronometer.
How accurate is an ETA 2824 movement?
The 2824-2 itself has been in production since 1982 and is available in four grades: Standard, Elaboré (improved), Top and Chronometer — as the grades increase, so does the movement’s accuracy, finishing level and price (by way of example, a Standard 2824-2 is accurate to within an average rate of +/-12 seconds/day.
Which ETA movement is best?
The 2824 is one of best-known ETA movements. Dubbed “the workhorse.” it’s highly prized for its reliability, accuracy, and durability. The 2824 is a self-winding movement with a 38-hour power reserve. You can find it in watches produced by brands like Tudor and Breitling.
How often should you service ETA 2824?
Registered. duke4c said: Aside the fact that it has to be maintained every 5-7 years…
What is an ETA 2824 movement?
One workhorse of the ETA mechanical line is the ETA 2824-2, The 2824 is an automatic winding, twenty-five jewel movement, available in four executions or grades: Standard, Elaborated (improved), Top and Chronometer.
What happens if you don’t service an automatic watch?
Not using an automatic watch for long periods of time can cause the lubricants to coagulate. This causes inaccuracy or it will bring the watch to a standstill completely. There’s no need to wear one watch too often but find a way to rotate your collection evenly.
What kind of watch movement is ETA 2824-2?
ETA Caliber 2824-2 Watch Movement | Caliber Corner The ETA caliber 2824-2 is perhaps one of the most well-known and most recognized movements in the watch industry. It has been in production since 1982 and was based off of the original Eterna caliber 1427.
What kind of balance does ETA 2824 have?
The 2824, the best known of the family, is nearly 5mm thick and 25.6mm in diameter. Clearly, it’s self-winding, with that oscillating weight spinning up a 38-hour power reserve. The balance runs at 28,800 bph (4Hz) and the movement hacks. It has 25-jeweled bearings.
Which is better ETA 2824 or ETA Invar?
Watchmakers argue that the relatively humble 2824—when properly regulated, oiled and adjusted—can easily match movements from far smarter makers for accuracy. More practically, it can beat most of them for sheer robustness. Its heavy, brass plates may not be as temperature stable as Invar, but a 2824 will take a beating and still come up ticking.
What kind of rotor does the ETA 2824 use?
The grand-daddy of Watchworld, the ETA 2824, uses that same five-bearing format for its winding rotor to this day. So, the basics. For ease of reference, it’s probably best to avoid wading through every variant of large date, small date, day-date, no date, and Medjool date to concentrate on the principal actors.